20 Most Recent 2004 GMC Envoy XUV Questions & Answers

It is part of the throttle body. If you want to replace the throttle position sensors. You will have to replace the throttle body as a unit....Note: There should be two of them in your scan tool data screen.

2004 GMC Envoy... | Answered on Feb 27, 2019

Latch actuator is probably bad an needs replacing . Your best bet , take it to a qualified repair shop. An have it checked .

2004 GMC Envoy... | Answered on Jan 21, 2019

check the fuse/relay. if it is neither of these check the switch with a multimeter. If you can hear the motor trying to move the glass when you try the switch it may be the regulator needs attention. It may be the motor needs to be replaced.

check fuse and relay along with the switch first then the regulator and motor afterwards. Replacing the small electronics is obviously easier than having to open up the tailgate to check the mechanics of the winedow.

2004 GMC Envoy... | Answered on Dec 10, 2016

Hello Anonymous,

These system are controlled by an electronic module that should
send a fault code to the BCM (Body Control Module) and accessed via the DLC (Diagnostic/Data Link Connector) if a fault is present.

Some Auto parts stores will connect a OBDII scanner to your vehicle for free and provide you with a starting point should any fault codes be present. Fault code scanning is always the first step in trouble shooting a problem.

2004 GMC Envoy... | Answered on May 21, 2016

4.2 engine? It takes a bit to get it off. Why do you want to get to them? I can say these aren't your problem. And if they are, you have other problems that replacing them is only a short term fix.

2004 GMC Envoy... | Answered on May 04, 2016

Check to see if you have brake lights. If the brake light switch under the dash is broken or mis-aligned it can cause the shift lock to stay on

2004 GMC Envoy... | Answered on Feb 24, 2016

hi there
the blower has a fuse first check the fuse
can find the fuse location in the owners manual
if its not the fuse then some unit inside the blower went bad

2004 GMC Envoy... | Answered on Jun 12, 2015

The tailgate assembly requires regular lubrication and adjustment in order to keep functioning properly. If it has stopped functioning, follow the manufacturer's recommendations for periodic lubrication and adjustment.

2004 GMC Envoy... | Answered on May 12, 2015

remove transmission oil pan solenoid are inside the oil pan
hope it helps

2004 GMC Envoy... | Answered on Apr 06, 2014

if your steering wheel spun free when it was disconnected you probably broke the clockspring

GMC Cars &... | Answered on Jun 30, 2020

Not finding what you are looking for?
2004 GMC Envoy XUV Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,172 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

2002 GMC Envoy
2002 GMC Envoy

1,364 Questions

2003 GMC Envoy
2003 GMC Envoy

1,326 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

Top GMC Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • Envoy XUV GMC

Most Popular Question

throttle position sensor tps 2004 gmc

  • Cars & Trucks