What # fuse's J5 25amp , J4 25amp , M 30 15amp , M13 20amp M33 10amp . All these fuse's are power supply's for door modules and to the wiper / washer switch . The washer pump is controlled by the totally integrated power module . I suggest you google TIPM - dodge totally integrated power module . Chrysler , Dodge , Jeep all use this componet . Also watch youtube videos on finding a automotive electrical short . That's what you have a direct short to ground on those power supply circuits

2007 Dodge Nitro | Answered on Dec 14, 2016

1 Answer

I touched both poles of my battery on my 2007 dodge nitro which fuse do I need to change to restore power

If you reversed poles on the battery. You need to have it scanned. See which ones read. If none read, then you have to start disconnecting them one at a time till some thing reads. This is a problem that one computer has shorted. It shorted to the data lines.

2007 Dodge Nitro | Answered on Dec 13, 2016

0 Answers

2007 dodge nitro hearter blows cold on defrost and on floor

2007 Dodge Nitro | Posted on Nov 26, 2016 | Be the first to answer

1 Answer

On my 07 doge nitro do you replace coil along when replacing plugs

Nacho, Coils are not normally replaced when changing spark plugs. Use the factory recommended plugs(OEM) . Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.nitroforumz.com/threads/changing-spark-plugs.30635
Changing Nitro Plugs 3 7 4 0L
how to change spark plugs in dodge nitro
More Information for NGK 6987

2007 Dodge Nitro | Answered on Aug 23, 2016

1 Answer

I've got a 2007 Dodge Nitro 3.7 L V6 and I cannot find the relay or fuse that engages the AC compresser clutch.What would it be labeled as?

If the fuse is ok, there may not be enough freon in the system to operate the safety pressure switches. 2007 Dodge Nitro Owners Manual Pdf

2007 Dodge Nitro | Answered on Aug 22, 2016

1 Answer

Transmission oil pan replacement

Measure all the fluid you drain and replace it with the same amount plus 1/4 quart.

2007 Dodge Nitro | Answered on Jul 08, 2016

1 Answer

The horn has stopped working

Typically the electrical connection between the moving steering wheel and fixed steering column is the culprit. There are different names for this type of connector but it is usually in the form of some type of clock spring like device. You don't want to mess with it because you will be getting into airbag country. KABOOM! Dealer or skilled specialty automotive shop should replace.

2007 Dodge Nitro | Answered on May 27, 2016

0 Answers