20 Most Recent 2014 Mercedes-Benz CLA-Class Questions & Answers


Robert,

Check out this linkie and follow the video procedures.
https://www.youtube.com/watch?v=4X5om0rdKa8

good luck.

2014... | Answered on Jul 12, 2019


WHAT HAVE YOU CHECKED FOR . FUEL(RELAY)/SPARK IS THE FUEL PUMP RUNNING LISTEN FOR IT WHEN YOU TURN THE KEY TO THE 1ST POSITION .

Mercedes-Benz... | Answered on May 08, 2020


i believe its an air supply issue to transmission, either actuator on trans or the air drier,

Mercedes-Benz... | Answered on Apr 04, 2020


The hood release is a red lever under the dashboard about shin height. I found the image on a Haynes online manual -
Opening the bonnet Mercedes Benz Class 2008 2011 Petrol B180 1 7

Mercedes-Benz... | Answered on Jan 25, 2020


Look under the dash for a rectangular door approximately 3" wide by 1" tall. It is located almost under the center of the dash close to the hood latch.

Mercedes-Benz... | Answered on Nov 19, 2019


You can try out some guide from here reliable-store. com

they also provide live chat feature for instant help and it's very useful

Mercedes-Benz... | Answered on Oct 02, 2019


Assuming you didn't drill the lock, it would have been best to access the interior of the vehicle (if not deadlocked, breaking in would be relatively simple) and current could be supplied to the vehicle via the cigar lighter or from under the hood by connecting to the battery circuit in order to use the in-car trunk release if fitted.
A way into the trunk can usually be found by removing the rear seat or hooking the keys using a fishing tool through the armrest aperture if there is one.

Mercedes-Benz... | Answered on Oct 01, 2019


assuming it is right hand drive the logical place for the hood release is on the left side of the passengers seat just under the dash http://www.mercedesmedic.com/wp-content/uploads/2016/02/open-hood-mercedes-benz-release.jpg

Mercedes-Benz... | Answered on Sep 25, 2019


I recently had my engine replaced in my 2002 grand marquis 4.6 with a 2009 crown Vic 5.4 engine and was running fine until I broke my ignition and tried to replace it myself I bought a new ignition switch didn't work so I bought a steering column and still won't start what do I do

Mercedes-Benz... | Answered on Sep 24, 2019


Usually a corrosion problem with the antenna connectors at the radio and/or antenna, but can also be caused by a faulty antenna wire.

Mercedes-Benz... | Answered on Aug 23, 2019


P0300 indicates a random misfire - a misfire that is not consistent and not confined to one cylinder. Worn/faulty spark plugs, failing coil(s) or coilpack, wiring, connections... Fix that and the other codes will probably disappear.

Mercedes-Benz... | Answered on Aug 19, 2019

Not finding what you are looking for?
2014 Mercedes-Benz CLA-Class Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

jalal

Level 2 Expert

178 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CLA-Class Mercedes-Benz

  • CLA-Class Mercedes-Benz

Most Popular Question

reset bf service message 2014 cla 250

  • Cars & Trucks
Loading...