20 Most Recent 2008 Subaru Tribeca Questions & Answers

for heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-store is very active in this.. instant help, emails and all that's fantastic

2008 Subaru... | Answered on Feb 14, 2019

You need a dealer, this is way beyond an amateur repair, comprendo?

2008 Subaru... | Answered on Jan 02, 2018

Yes, fabrication of the necessary adapter brackets are required, and this will include welding.

2008 Subaru... | Answered on Nov 18, 2017

Have you checked; the fuses? The power connection? The ground connection?

2008 Subaru... | Answered on Nov 09, 2015

Sounds like a bad ground at the battery. Remove terminals and clean. There are brushes made for this task, you can buy at a parts store along with the battery cleaner in a spray can. Use them both and this procedure works great.

2008 Subaru... | Answered on Nov 02, 2015

Replace the volume control(rheostat) inside the radio. Only way to fix it. I would personally just live with it until one or the other quits working. Then replace the radio.

2008 Subaru... | Answered on Jul 04, 2015

Hi, replacing the front wheel bearings on any vehicle is difficult if you don,t have the right tools, as the driveshaft and wheel hub (where the bearing is seated) needs to be removed. The hub housing the bearing may have to be heated (depending on corrosion) when the bearing is being pressed out, by using a heavy duty vice , and the new bearing is pressed in using the vice and the old bearing as a guide. I would strongly suggest you refer this repair to someone who has done this before, I personally would not undertake to change front bearings ever again, the first time for me was an experience I wouldn't want to undertake again. All the best.

2008 Subaru... | Answered on Oct 15, 2014

Take the front tyre off

Undo the brake caliper and hang it nearby (try not to kink the brake line)

Remove brake disk

There should be a nut in the middle that needs to come off, might have a clip to remove first then unbolt.

Slowly pull out the wheel bits and there you should have the bearing in grease in the middle.

Simply switch for new one packed in grease, reverse the process and bob is your uncle....

2008 Subaru... | Answered on Oct 15, 2014

some are plastic with a rubber boot that push into the hole in the panel and the wire clips on the back of the switch and others actually have a rubber boot with a nut under the boot that you undo and remove the switch,but make sure whichever one it is that you disconnect the power or it may short out and blow the fuse

2008 Subaru... | Answered on Jul 23, 2014

It is related to the cam position sensor. If it has vvt timing. Low oil will affect it.

2008 Subaru... | Answered on May 06, 2014

You can buy a 2008 Tahoe with bucket seats but I'm afraid I cannot find any information about switching out the seats. -------------------------------------------------------------------------------
ELM 327 1.5V USB CAN-BUS Scanner

2008 Subaru... | Answered on Apr 03, 2013

Not finding what you are looking for?
2008 Subaru Tribeca Logo

61 questions posted

Ask a Question

Usually answered in minutes!

Top Subaru Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tribeca Subaru

  • Tribeca Subaru

Most Popular Question

2008 subaru tribeca pull fuse

  • Cars & Trucks