20 Most Recent 2009 Jeep Liberty Questions & Answers

Go to online store reliable they have repair manuals I am sure you will get the solution. Here's the link
Best Manuals

2009 Jeep... | Answered on Dec 08, 2017

CEL blink means gross misfire, and cat burn up
CEL on can mean 100 + possible failures
SCAN it, first.
temp move with there is air pocket on top of engine
cold engine, fill the read full at ITS CAP, now the gauge will work.
if not low on AF then the ETC is bad or its wiring messed up
look at its wires first, are they OK?

it's and intermittent,failure
cant fix it if its not broke. (true mostly)
wait till it fails?
or take it in failing.?
or buy a scan tool and use it. (far far far cheaper that)
the stop , key on, and scan it. now. see DTCs you will.
or when it fails, key off on 3 times to see DTCs NOW, not later.
see flash codes now with CEL lamp.... all jeeps do this test.

there is no other way.

the DTC can clear (error) is 3 trips) some faster.
even the gas cap loose can trip a DTC for EVAP , like millions see.

2009 Jeep... | Answered on Mar 23, 2017

3 possibles.
blown fuse to cluster, most have 2,
that part of cluster is bad.
PCM lost commuications to the cluster,

but with no scans with a scan tool , you will never know.

2009 Jeep... | Answered on Mar 14, 2017

2008 Jeep Liberty Belt Anon, Schematic belt.Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Tensioner Idler Pulley 3 7L 2004 13...
2008 Jeep Liberty Serpentine Belt Removal
2008 Jeep Liberty Belt routing Google Search

2009 Jeep... | Answered on Jun 26, 2016

Need more info. check link below may help
Jeep Anti Theft update

2009 Jeep... | Answered on Jan 13, 2016

spanish on a USA english only forum.
red light illuminates on the board with the symbol (!)
why not post a photo of that lamp.
if car is no in USA< the lamps are all different, so where are you?
the glove box, has the operators guide, remove it and read the page on warning lamps, its all there to read, just read it.
if lost?, buy one, and not get stranded for silly lamps... ignored.

in CANADA< the (!) lamp is brakes bad
but im just guessing your unstated country.
99.9% of all post fail this way, no country stated, and is just a silly waste of time...
btw cars work different in different countries, by law......etc.

2009 Jeep... | Answered on Jun 27, 2015

a fish? caught night. (done it)

2009 Jeep... | Answered on Feb 22, 2015

It is a pretty straight forward job. Rock Auto is one of the best parts sources.
RockAuto Parts Catalog

2009 Jeep... | Answered on Feb 02, 2015

I think this is what you may need, most have a resistor, this video maybe similar to yours, although a older model. http://youtu.be/jn_Gk6cd0Mc

2009 Jeep... | Answered on Jan 07, 2015

there maybe some dirst in the sensor - try cleaning it

2009 Jeep... | Answered on Nov 20, 2014


2009 Jeep... | Answered on Nov 20, 2014

check fuses yet?
check for jam or debris?
get it serviceds
read the FSM book? on diagnosis?

2009 Jeep... | Answered on Nov 02, 2014

there are only 2 kinds.
the unbolt kind
and the , they have plastic clips that unlock (press em) and it pulls out.
all cars.

no engine stated, size, ?
so may vary by engine. as each engine has its own cooling needs and sub system.

2009 Jeep... | Answered on Sep 30, 2014

The gate light on my 2002 Liberty was on for a long time and I researched on this site about it but ended up just hitting the trip meter button after starting up and that canceled it out. The other day my rear window wiper was not working and my security system had quit working also. Looking at the book in the fuse section I found that the rear window wiper is on it's own fuse, number 17 in my 2002. I took that fuse out and looked at it and it seamed good, no break or burn marks. I replaced the fuse anyway and low and behold the rear window wiper worked, the gate light went out, and the security system was working again. I could not find a fuse for the security system of the gate light.....they are all on the rear wiper fuse. Problem solved, hope this helps you, I found it purely by accident.

2009 Jeep... | Answered on Aug 25, 2014

The blower motor resistor is behind the glove compartment. The blower motor relay is under the hood in the fuse panel.

2009 Jeep... | Answered on Jun 01, 2014

Did you check the fuse?

2009 Jeep... | Answered on Jun 01, 2014

Not finding what you are looking for?
2009 Jeep Liberty Logo

Popular Tags

123 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,622 Questions

2005 Jeep Liberty
2005 Jeep Liberty

825 Questions

2003 Jeep Liberty
2003 Jeep Liberty

746 Questions

2004 Jeep Liberty
2004 Jeep Liberty

719 Questions

2006 Jeep Liberty
2006 Jeep Liberty

621 Questions

Top Jeep Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Liberty Jeep

  • Liberty Jeep

Most Popular Question

rear drive shaft boot

  • Cars & Trucks