20 Most Recent
Questions & Answers
The person you have checking your vehicle is a parts replacer. Not a mechanic. He's just hoping to hit it right, eventually. Have someone check the sensors at the rotors my friend. Most likely one is out of position and not picking up the proper message for the computer. Yes, once the light is out, from all the other work he's done, it will come back on each time. That's just the nature of the beast. If it is just a sensor at the rotor out of adjustment, the light wont come back on.
on Jun 15, 2017
How do I change the entire headlight assembly on a 2009 Dodge Avenger?
lift the hood on the front of the rad you will find a plastic black cover , its held on with push pin fasteners to remove them you need to lift the center bit , use a small screw driver to do this the fastener now lift out there should be 6 to 8 of them now this cover will come off, you will find 4 10mm bolts that hold the light assemble in place take them out gentley remove said light , the bulb comes out with a 1/4 turn of the light socket DO NOT TOUCH THE GLASS PART OF THE BULB WITH YOUR BARE HANDS AS THE OIL ON YOUR SKIN WILL CAUSE A HOT SPOT AND BURN THE BULB OUT WEAR GLOVES IF YOU NEED TO TOUCH THE BULB! repete process to install
on Nov 28, 2015
Not finding what you are looking for?