20 Most Recent 2009 Chevrolet Equinox - Page 2 Questions & Answers

Rather difficult but not impossible, check youtube for a complete walk-through

bring back to dealer under warranty or call them

Check if your serpentine belt is too loose, from a worn tensioner pulley maybe, but sounds like alternator and power steering pulleys-both may be slipping or too loose.

inside the seat there is a cable to control the tilt back could be cut or unhook

When Looking At The Front Of The Vehicle, The Oil Filter Is Under The Right Side Of The Intake Manifold (Located Just Above The Bell Housing). In Order To Change It, You Will Need A 36mm ECOTEC Filter Wrench (Its A Really Shallow Socket) A Swivel, 12" Extension & Ratchet. The Thing You Are Removing Is The Black Cap. Rotate It Until It Can Be Removed By Hand & Lift Out. When Installing The New Filter, Make Sure The Little o-ring Came w/ The Old Filter & Drop The Filter & Cap Straight Down Into The Block --HAND TIGHTEN-- Until The Factory O-ring (Its Reusable) Contacts The Block & Finish Tightening w/ The Socket - Just Needs To Be Snug, Dont Stupid Tighten It or It Will Break.

it is common to get mice or? in the blower motor, you have to drop the blower motor out from under the dash? and check for debris