20 Most Recent 2013 Ford Flex Questions & Answers

Which ever door latch, top wire is voltage, bottom wire is ground.
door latch-pnbgzxoozdeesuh20dfdzcf2-1-0.jpg

2013 Ford Flex | Answered on Jul 04, 2017

You will need to have the ODB error codes read out, either at your local auto parts store or a mechanic's shop. The error codes will give some idea of what the issue is by indicating which sensors are out of parameter.
The "wrench" is equivalent to a CHECK ENGINE light.

2013 Ford Flex | Answered on Aug 13, 2014

There is an after-market harness adapter, which will allow ANY back-up camera to work with the Flex. (I saw it withing the past week on eBay).

2013 Ford Flex | Answered on Jul 19, 2014

The radio SERIAL NUMBER will be required for calculating a code

On some radios, pressing Buttons 6 and 1 or 6 and 2 (together) may display a Serial Number.

If not , then remove the radio from the dashboard.

Then post the radio make model plus all the letters numbers on any labels,barcodes or stamped in the metal casing.

This information can then be used to see if a code can be calculated
For further useful information CLICK HERE

Ford F Cars &... | Answered on Jan 08, 2020

I think you should try this website www.reliable-store.com . It helps you repair your vehicle easily without more help. Ask the girl in chat at the bottom of the page she will help quickly

Ford F Cars &... | Answered on Mar 06, 2018

check for air leaks in the induction system and check the throttle butterfly for sticking in the throttle body housing. from memory i think your car does not have a throttle cable its a fly by wire system

Ford F Cars &... | Answered on Feb 14, 2018

if turbo
turbo problem
run the fault codes

Ford F Cars &... | Answered on Jan 20, 2018

Several Suggestions,1 the wiring on the back of the Instrument panel,corrosion found on many early focuses to circuitry on binnicles, another is the sensor on the back of the gear box,not easily accesable but under £30 for part if fit self, nearer £140 and no guarentee at Garage! Failing this look on web pages for others having same issues..theres enough of them!

Ford F Cars &... | Answered on Dec 26, 2017

if you have a multi meter check the cable, put one end of the meter on the relay or the fuse and other end with a needle and poke the needle in the wire going along testing it at different pinpoints and see if you get a feed, the wiring can become brittle over time, also if your model has lighting control module, ie bulb out technology it can be this as it can turn off power to the light. its like canbus tests for a bulb, if this has failed it can stop power to wiring. some models were fitted with this.

Ford F Cars &... | Answered on Dec 24, 2017

when you run low on fuel a lot its makes the fuel pump run warmer than it should. you may have cooked it so get your fuel pressure checked out

Ford F Cars &... | Answered on Nov 28, 2017

Your car probably uses a CAN-bus system where almost every function is subject to computer decisions.

A low battery can cause strange things to happen.

Ford F Cars &... | Answered on May 06, 2017

Not finding what you are looking for?
2013 Ford Flex  Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford F
2000 Ford F

-4 Questions

2007 Ford F
2007 Ford F

140 Questions

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

F Ford

  • F Ford

Most Popular Question

canister purge valve in 2013 ford flex

  • Cars & Trucks