Kia Sedona - Recent Questions, Troubleshooting & Support

on my 2006 the front right bracket broke off under the seat cushion. i just replace the whole seat from a junked one.

Tell us the code and we will tell you the fix. https://www.google.com/search?q=2015+Kia+Sedona+screen+code ..

If you have got to jump start a 2015 you need to get the dealership you purchased it from to get it sorted out

It is shown here. It sits in the V between the cylinder banks https://www.fixya.com/cars/t11493453-exact_location_knock_sensor_in_2004_kia Videos on various Kia models. They all run to a theme. ..

You don't say 'why'? Just over $100, or for cheap, go to a auto salvage yard. Don't forget the lock cylinder and key are also part of the anti-theft system and engine immobilizer. https://www.google.com/search?q=2006+Kia+Sedona+van.+ignition+lock+cylinder ..

According to the owner's manual for a 2006 KIA Sedona, basically 2.275 Gallons. •Coolant Capacity is 8.6 l (9.1 US qt.) Classification: Ethylene glycol base for aluminum radiator • Use only soft (de-mineralized) water in the coolant mixture. • The engine in your vehicle has aluminum engine parts and must be protected by an ethylene-glycol-based coolant to prevent corrosion and freezing. • DO NOT USE alcohol or methanol coolant or mix them with the specified coolant. • Do not use a solution that contains more than 60% antifreeze or less than 35% antifreeze, which would reduce the effectiveness of the solution. For mixture percentage, refer to the lowing table. Ambient Temperature -15°C (5°F) = 35% Coolant Solution & 65% Water Ambient Temperature -25°C (-13°F) = 40% Coolant Solution & 60% Water Ambient Temperature -35°C (-31°F) = 50% Coolant Solution & 50% Water Ambient Temperature -45°C (-49°F) = 60% Coolant Solution& 40% Water

Help here, but it sounds like the solenoid has failed. https://www.google.com/search?q=2012+Kia+Sedona+Stuck+in+Park A new shift interlock solenoid is $28 https://www.google.com/search?q=2012+Kia+Sedona+replace+shift+interlock+solenoid ..

It's ur throttle position sensor unplug it and plug it back up make sure to Clow it out before plugging it bk up

Check here.... https://fuse-box.info/kia/kia-sedona-2006-2014-fuses-and-relay Best to you.

You need an Auto Locksmith (alarm / stereo installer type place) or an Auto Electrician to set it back up using a pro grade scan took computer. When you remove the battery, it needs reprogramming. https://www.google.com/search?q=auto+electrician+near+me ..

Question edited for clarity. Question moved to model category. It is an automatic? Do you drive STRICTLY with one foot? Left foot firmly rested on the floor. I saw a lady once that drove with right foot on the accelerator and left foot on the brake. It sounds like your brakes are lightly on all the time. If the vehicle is in Neutral, can you push it to move it? If not the brakes are binding and you need to find out why? Make sure the two Factory Recalls have been done? https://www.autobytel.com/kia/sedona/2006/car-recalls/ It appears to be a known issue. https://www.google.com/search?q=2006%2F07+kia+sedona+2.9+crdi+brakes+overheating ..

How do i remove the intake plenum on my 2004 kia sedona?

JustAnswer http://www.justanswer.com > Car Questions Jul 15, 2008 - 1. Detach the P.C.V. · 2. Disconnect the connecting part of vacuum hose. · 3. Remove the surge tank stay. · 4. After reducing the pressure of fuel ... 1 answer · Top answer: Hello and thank you for choosing Just Answer. [//f01.justanswer.com/ref/http

I answer to your statement these door handles are mounted with 4 small bolts located inside the door frame. You will need to remove the door card to get access to them. Once the 4 bolts are removed the handle can be lifted out far enough to remove the pull bar the handle operates. The handle should then simply lift out. Refitting is the opposite of this method.

Automatic sliding doors use optical or motion detection sensors to activate their motorized opening and closing functions. These sensors are mounted over the automatic door. The sensors use either infrared or microwave technology to observe motion.------------------------------------------------------------------------------Car Diagnostic Tools

The stereo installation's weak connection is the most likely source of this problem. Make sure the wiring harness is secure by inspecting it. If it doesn't work, it could be necessary to disassemble the door panel to check that all the connections are made properly. If the wiring is correct, you might need to consult the vehicle's wiring diagrams to conduct additional troubleshooting.

brake pad warning light pads need changed

2005 kia optima: my input shaft speed sensor located ...

https://www.justanswer.com > Car Questions Jul 27, 2010 - The input shaft speed sensor is located on top of the transmission Just under the Air Filter. So you will have to remove the Air Filter and you ... 1 answer · Top answer: Hi thank you for your question hope this helps. The input shaft speed sensor. Videos as well https://www.google.com/search?q=2005+Kia+Sedona+Location+of+input+turbine+speed+sensor+for+automatic+transmission ..

Hate to say it but if it's grinding it's wheel bearing time.

Time for shocks and struts.

Likely an improper air/fuel mixture. You need know the fuel trim values plus multiple inputs e.g. MAF, temp, fuel pressure, up/downstream O2s, etc. As it appears bank related, look for bank related vacuum leak, O2, or cat.