Datsun Cars & Trucks - Page 7 - Recent Questions, Troubleshooting & Support

0helpful
1answer

Where is the Voltage Regulator located in a 1976 280Z

Check in the back of the alternator
1/20/2014 9:10:23 PM • Datsun Cars &... • Answered on Jan 20, 2014
0helpful
1answer
0helpful
1answer

My passenger window won't roll up in my 2006

there ar 2 fuse boxes in the sentra 2006 model. first one is in the engine compartment next to the battey on the left. 2nd one is inside the vichle behind the loose coin compartment. check anything noted as (power window or electric window) if the fuses are ok then expose the motor and check that the plug is correctly joined and that there is no damage to any of the cables> once that has been proven to be sound the next step to follow is to make sure that there is power 12Vdc getting to the motor, if so check if there is continuity between the ( Pos+ & Neg- ) wires. If so that means that your motor is still working after all that the only things that are left to cause a problem is a broken wire somewhere or the switch is faulty. hope this helps
1/20/2014 8:31:37 PM • 2006 Datsun... • Answered on Jan 20, 2014
0helpful
1answer
0helpful
1answer

How did u go about

Custom made engine mounts and use a Commodore gearbox.
1/7/2014 7:47:41 AM • Datsun Stanza... • Answered on Jan 07, 2014
0helpful
1answer

I have a 1983 datsun

Alternator is feeding the ignition power. Your best bet is an auto electrician.
1/7/2014 7:44:01 AM • 2007 Datsun 720 • Answered on Jan 07, 2014
0helpful
1answer

1984 dtasun 720 pickyp truck starts

Could be the fuel cap not breathing and stopping fuel by vacuum. Is it auto or manual?
1/7/2014 7:42:20 AM • Datsun 720 Cars... • Answered on Jan 07, 2014
0helpful
1answer

How to sew benchseat covers for a 1983 datsun 4x4.

How to sew is more than I can explain here. To replace slave cylinder just disconnect the hose then undo the two bolts and reverse procedure to refit the replacement.
1/7/2014 7:39:42 AM • Datsun 720 Cars... • Answered on Jan 07, 2014
0helpful
1answer

Firing order Datsun 710 (4cyl. L20B engine)

Remove the rocker cover. Turn the engine until it's at TDC on No.1 Both No.1 rockers should be loose. Remove distributor cap and look where rotor is pointing, this is No.1 plug lead.
1/4/2014 11:33:42 PM • Datsun 720 Cars... • Answered on Jan 04, 2014
0helpful
1answer

Firing order or diagram

1-3-4-2
1/4/2014 11:22:53 PM • Datsun 720 Cars... • Answered on Jan 04, 2014
0helpful
1answer

Firing order for l20b 720

1-3-4-2
1/4/2014 11:19:50 PM • 2007 Datsun 720 • Answered on Jan 04, 2014
0helpful
1answer

Datsun 180b wont keep running

Replace the ballast resistor on the coil.
1/4/2014 11:16:26 PM • Datsun 1600 Cars... • Answered on Jan 04, 2014
0helpful
1answer
0helpful
1answer

How about the clearance of the valves

.006" intake hot .008" exhurst hot thanks stephen
1/2/2014 3:10:42 AM • Datsun 720 Cars... • Answered on Jan 02, 2014
0helpful
1answer

Datsun firing order diagrams

1432 firing order
12/19/2013 11:29:23 PM • Datsun Cars &... • Answered on Dec 19, 2013
Not finding what you are looking for?
Datsun Logo

327 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Datsun Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

jws1013

Level 3 Expert

1713 Answers

Are you a Datsun Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...