Cadillac DeVille - Popular Questions, Answers, Tips & Manuals
2001 Cadillac Deville. What would cause the water pump pulley to melt on it?
The water pump pulley on your car may melt if the water pump belt tensioner seizes, causing the pulley to overheat and deform. This may also result in the engine overheating and possibly damaging the head gasket. To fix this problem, you will need to replace the water pump drive pulley, the water pump belt, and the tensioner pulley. You may also need a special tool to remove and install the new pulley.
1998 Cadillac DeVille electrical?
Interior Lights Dimming Circuit Description
VF Displays
When the ignition switch is in the RUN position, the instrument cluster activates its VF display. The instrument cluster also coordinates the display illumination for the radio (IRC), the cellular telephone (PHN), and the climate control Panel (CCP) anytime the ignition switch is in the RUN position.
Incandescent Dimming 1 (INC DIM 1)
The INC DIM 1 consists of lamps powered by CKT 8 (GRY). These are referred to as the park lamp backlighting because they are only active if the park lamps are on and the ambient light sensor indicates darkness.
Incandescent Dimming 2 (INC DIM 2)
The INC DIM 2 output is used as a general interior light source and an illuminated entry feature that provides interior lighting. The INC DIM 2 consists of lamps powered by CKT 1244 (BRN). When one or more of the following conditions occur, the INC DIM 2 lamps will be active:
• The interior lamps switch is active.
• The park lamps are on and the ambient light sensor indicates darkness
• The ignition switch is in the RUN position and the ambient light sensor indicates darkness
• A Class 2 message is received from the body control module (PZM) indicating that the courtesy lamps are active.
Dimming
The instrument cluster controls all of the interior dimming functions. The instrument cluster receives an ambient light level input from the ambient light sensor and determines whether it is light or dark. If the ambient light sensor is inoperative, the instrument cluster will assume a condition of darkness. Dimming of the VF displays is only allowed when the ignition switch is in the RUN position, the park lamps are on, and the ambient light sensor indicates darkness. If all conditions for the VF dimming are met, the instrument cluster uses the input from the potentiometer in the headlamp switch to determine the level of dimming. The dimming level is sent to the radio (IRC), the cellular telephone (PHN), and the climate control panel (CCP) via a Class 2 message. These modules then adjust the dimming level of their VF display. The instrument cluster provides dimming control of the incandescent lighting through the INC DIM 1 and INC DIM 2 outputs. The instrument cluster provides dimming control of the electronic PRNDL LED through CKT 1382 (PPL/WHT). The dimming level will very based on the potentiometer in the headlamp switch whenever the parklamps are on and the ambient light sensor indicates darkness, regardless of the position of the ignition switch.
1998 Cadillac DeVille ' DeVille, Eldorado (VIN E/K) Service Manual ' Body and Accessories ' Lighting Systems ' Diagnostic Information and Procedures ' Document ID: 489166
--------------------------------------------------------------------------------
Interior Lights Dimming System Check
Step
Action
Normal Result(s)
Abnormal Result(s)*
1
Turn the ignition switch to the OFF position.
Place the interior lamps switch in the ON position.
All incandescent lighting on the INC DIM D2 output turns ON. INC DIM 2 includes all of the lighting on CKT 1244 (BRN), which is the backlighting for the headlamp switch and the floodlighting for the vehicle doors.
Incandescent Lamps Inoperative
2
Place the interior lamps switch in the OFF position.
Turn the ignition switch to the RUN position.
INC DIM 2 lighting turns OFF.
All of the VF displays light. VF displays include the following components (if equipped):
• The radio (IRC)
• The cellular telephone (PHN)
• The driver information center (DIC)
• The instrument cluster (IPC)
• The climate control panel (CCP)
• Vacuum Fluorescent Displays Inoperative - All
• Incandescent Lamps Always On
3
Cover the ambient light sensor with the twilight OFF.
Place the headlamp switch in the PARK position.
The park lamps turn ON.
All of the VF displays dim in order to match the current dimming control level. All of the incandescent lighting for INC DIM 1 and INC DIM 2 light at the current dimming control level. INC DIM 1 includes all of the park lamp backlighting on CKT 8 (GRY) which is composed of the following components:
• The radio (IRC)
• The front cigar lighter
• The steering wheel controls
• The driver information center (DIC)
• The climate control panel (CCP)
• The instrument cluster (IPC)
• The heated seat switches
• The auxiliary blower switches
• The ash tray lamps
• The PRNDL lamp
Exterior Lights System Check
4
Rotate the headlamp switch dimming control in both directions.
All of the VF displays and all of the incandescent lighting dim and brighten in response to the headlamp switch dimming control.
Vacuum Fluorescent Displays Do Not Dim with Instrument Panel Dimmer Switch
* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.
2001 Cadillac Deville. Fuel pump went out so I bought a new one. One day the car just went dead while driving it. And would not start back it would crank but not start
not true at all the prime pulse is 1 to 3 seconds
and stays off until cranked, only cranking matters
prime only speeds up the start, cranking pressure matters.
and rail pressure for sure. cranking. matters. most.
if car has IMMo you know when the key fails the engine can run for 1 to 10 seconds on some cars, to get you say out of trouble
or get the car off a curb to tow it? yes. of away from a cliff??????
hummmmm
first is learn to find the IMMO lamp on the dash and see if it is glowing the correct way as they free users guide states
fact #2:
scan the pcm when it fails to start or stalls
the scan tool tells you why, sure can, even shows key bad
try both keys yet, came new with 2 keys new. car.
both IMMO keys
modern cars need scan too to diagnose EFI
if can tell you lots of things like key bad,spark bad. or fuses blow or
well 100s of things.
scan it
and use fuel pressure gauge at the rail.
only if all fuses all good and scans show no clues.!
then check pressure with a real meter.
2002 Cadillac Deville. It overheats after 1000 miles and cross over manifold leaks.
It is the winter. What you see as water is just condensation from the water that is in the fuel at molecular level. The test is, Are you losing water from the coolant system?
Water is nowhere new the valve stems, just oil.
Leave everything as it is. Re-evaluate in summer. The head gasket can be tested with a coolant system pressure test.
2004 Cadillac Deville. My dashboard information is not working on my 2004 Cadillac Deville
If all the lights on your dash seem to be off, the problem could be a bad fuse.
Locate the knob por dial that control the brightness of dashboard light.
Make sure the brightness control is turned on. If it is and the lights aren't working, the problemas may be a bad fuse.
Use your car manual and locate the dash fuse the fuse box is between under the steering wheel and the door. Pull out the fuse and use a test light by connecting the groud clamp to the metal and placing the other end where the fuse was. If the light come on, you need to replace the fuse.
My 2004 Cadillac Deville blows cool air on driver's side, hot on passenger side (set on Auto)
The HVAC control module handles all inputs from the dash and routes the correct airflow as commanded. Your problem will be related to a failure of one of the switches on the dash, a fault with the module or sticky/failure of one or more of the air valves in the HVAC box. It can be very hard to diagnose what the specific problem is, but given the noise, I think it will be related to the air valve operations (depends on whether the system is commanding cool or warm air at the time as to which one it is). You can get a code reader and see if there are any error codes in the system to see if that sheds light on the matter. Otherwise you will be stuck with a dealer visit.
Not finding what you are looking for?