Question about ATVs
First check to see if it has a spark or fuel by spraying a little starting fluid into the throttle body. If it does not, check the fuse to the fuel pump. If it runs then you check to see if the spark is getting to the spark plug. If not check the fuses and connection to the ecm.
Posted on Aug 11, 2020
High moisture with cheap belts would be a start. 2nd possibility is you have a bearing in an accesory drying out. Check water pump pully first with the screwdriver methode. Do not place on a moving part!!!
Posted on Nov 28, 2009
SOURCE: 85 ford ranger
there is a saftey switch on the clutch when u press it down it allows it to crank, the switch could have went out, there is also a little bar that slides into an opening in the top of the clutch that mite have slipped out, or there is something called a diaphram (i think thats what its called) it should be on the transmition with that year model it could have went bad or the wires mite be loose
Posted on Apr 25, 2010
SOURCE: My 2006 ford ranger started ran fine this morning drove to gas station left drove 15 miles then started making noise like missing or choking out then shut it off started it back up to go home went 4 m
Please check the:
- Pull up error code, if any.
- Fuel system.
- Ignition system.
- Cooling system.
Posted on Jan 11, 2015
Tips for a great answer:
Jan 18, 2018 | ATVs
Oct 31, 2017 | ATVs
Sep 09, 2017 | Polaris ATV
Jul 18, 2017 | ATVs
Dec 30, 2015 | Polaris 2013 Ranger Crew 500
Aug 21, 2015 | Polaris 2014 Ranger Crew 900 EPS Sunset...
Mar 04, 2015 | Polaris 2015 Ranger Crew 570 EPS
Jul 07, 2014 | Polaris 2012 Ranger 500 EFI
145 people viewed this question
Usually answered in minutes!