Question about Polaris ATVs
Need cdi wiring harness for 2005 rmk 550cc
Posted by Anonymous on
To adjust chain tension in the chaincase, loosen the jam nut on the chaincase with a 9/16" wrench a few turns. Then turn the adjustment ***** in with your fingers until it can't be turned by hand anymore. Once that point is reached back the ***** out 1/4 turn and tighten the jam nut. Best of luck, Daniel
Posted on Mar 12, 2016
There are two "recommended" methods.. both are used...
1. Stuff a 1/2" hose down the coolant bottle and siphon it out. Then remove the bottom hose and repeat the process.
Cleanest way i've found.
2. From Canada: Take your wet/dry shop vac. clean it really good. crack the hose connection at the head and thermostat while you hold the end of the shop vac there, and it will suck out all the coolant, and no mess in the engine bay.
Posted on Jun 12, 2017
Tips for a great answer:
Apr 09, 2017 | Polaris ATV
Feb 22, 2017 | Polaris ATV
Mar 12, 2016 | ATVs
May 02, 2015 | Polaris ATV
Jan 09, 2015 | Polaris 2006 Predator 500
May 27, 2014 | kawasaki 2005 KFX 400
Oct 19, 2017 | Polaris ATV
Jun 05, 2019 | Polaris ATV
148 people viewed this question
Usually answered in minutes!