Hi, my 100cc quad has a problem. It runs but every time it's shifts gear either reverse or forward it makes a loud clunk and jolts the machine slowing it down, It seems to me the gears are slipping but I have no knowledge on the subject so would be really grateful for someone's expertise.
My instinct says there is an oil shortage in the gear box ??
Testimonial: "I am a total novice I will have a look and let you know, should it be full to the top?"
Hi, I filled the machine with transmission fluid and it still does the same thing, any ideas?
×
SOURCE: ATV Polaris 330 (I think trailblazer) wont shift into gears
I have one of these and it always throws my friends for a loop. You have to push the foot brake to get the bike in park or high. It should shift very easy with the brake down, if not check if the spring didn't come off of your brake pedal. I hope this helped.
SOURCE: 2003 polaris trailblazer 250 wont shift into gear
I would inspect the shifter linkage and maybe check the belt for damage.A little wd40 might help.
SOURCE: I have a 1997 Polaris 250 trail blazer. It is an
The problem is a worn shift fork in the transmission. Replace the forks and check forward gear pinions and forward shift dog pinions for wear and replace if they show any signs of wear.
1,289 views
Usually answered in minutes!
I am a total novice I will try to have a look and let you know, should it be full to the top?
Mark Hi, I filled the machine with transmission fluid and it still does the same thing, any ideas? Apr 01, 2014
I have 150cc dinli quad when i put it intl forward quad doesent move what might it be plz?
Could it be the clutch
I have a dinili 90cc helix if I put it in reverse it will run perfect forward if I hit the throttle it grinds then moves a little then grinds.can anyone tell me what might be the problem please thanks
Hey terry, i have the same problem on my 150cc. I see your comment is from 2019 so have you found a solution?
×