How do I replace the fuel filter on my Suzuki Kingquad 500 atv 2012 model

Question edited for full make and model.
Question moved from Computers.

You must be Australian. You spell 'solenoid' like Australians speak it. :>D

You have a dead short to earth. Incorrectly wired. Start checking with a multimeter set to Ohms.

https://www.google.com/search?q=2006+Suzuki+KingQuad+700+replace+solenoid

you are not alone!

https://www.google.com/search?q=2006+suzuki+kingquad+700+blows+fuse

..

Question edited to add maker.
Question moved to the correct category 'make model'.

Remove the throttle body and clean it thoroughly. It is staying open.

https://www.google.com/search?q=Suzuki+KingQuad+500+that+surges+at+idle

..

fuel system dirty someplace. carb ,filter in tank, inline filter or air filter dirty. clean or replace as needed.

Dirt in the tank, or in your gas jugs if you use them

does it have a reverse gear? if so run it back-wards, you may have locked the differentials

There is a sensor that needs to be reset by a licensed technican, prepare to be ripped off.

Plugged fuel filter or weak external coil.

Check to see if you have significant voltage to solenoid and check that you have a solid frame ground. Hope this helps.

contact maker, or their forum,. it's best.

Mine is doing the same thing. I was told to clean the filter in the fuel tank. It was pretty choked up with stuff but after cleaning it, it still stalls... ???