Question about ATVs

1 Answer

Wiring problem. Won't turn over. Can't get wiring right. Suzuki quad runner 250 1999. Had some toggle switches. Rectifier burn up. Bought new one

Posted by Richard Mclean on

Ad

1 Answer

curtis miller

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Start looking for a full harness fo replace it with thats just a mess and will only lead to problems down the road

Posted on Feb 10, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Finding the Speed omatder cable on my Suzuki eiger 2005 400 quad because the quad isn't reading my speed


If you have the front wheel off recently one, the speedometer sensor is easily broken and a common occurrence when the wheel is removed and replaced.
The symptoms are erratic or non-working speedo.
Also, there is a wiring harness under the speedometer. Remove the 3 bolts holding on the speedometer, and carefully lift it up and check to make sure the harness is plugged together tightly.

Jan 04, 2018 | Suzuki 2005 Eiger Automatic 400 4X4

1 Answer

Repair Manuel for a Suzuki quad runner 4wd 250cc oil drain and filter for motor.


Haynes, Clymer, Chilton all make manuals... also your local dealer should sell you a manual...

Aug 27, 2017 | Suzuki 2005 QuadSport Z400

1 Answer

I was ridding my Suzuki eiger 400 automatic quad when i heard a loud pop and now theres no electrical power to any thing ,battery new and good fuses are good


I'd check the key switch first. then disconnect the rectifier just to rule out that and the stator. hopefully the cdi didnt blow up. with a loud pop you'd think you'd see some damage to whatever caused it.

Nov 09, 2014 | ATVs

1 Answer

Qw atv-02 I bought a quad bike off a guy on a


You may check the dealer for a wire schematic or purchase a repair manual for the bike. Sounds like a manual would be a better resource depending on what you said about getting screwed over.

Oct 14, 2013 | ATVs

1 Answer

4wheeldrive wont go off. only have power to motor when 4wheel drive is activated. have no reverse polarity to disangage 4wheel drive. found motor wire wore through to frame blowing fuse causing quad to...


one of your repaired wires is not getting power or ground.. Recheck your wires,.
And most likely look farther up the wire loom for burned threw wires..

Nov 23, 2017 | Suzuki 2005 KingQuad 700 4X4

Not finding what you are looking for?
ATVs Logo

Related Topics:

588 views

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

23938 Answers

Tom Chichester

Level 3 Expert

61759 Answers

Simon Atkinson
Simon Atkinson

Level 3 Expert

2057 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...