20 Most Recent
- Page 8 Questions & Answers
How do i disconnect the throttle from the carb on my artic cat 400 4x4
Its been atleast a month or 2 since ive worked on one of these, however im sure this will help you. If you follow the throttle cable to the carburetor (see my pic) on the throttle side of quad it will go into the side of the carburetor. You can remove the plate (circled in pink) to expose cable. Once plate is removed, you can see (circled in yellow) where the throttle cable end locks into. Carefully manuever the cable to come out. Do whatever you need to do, and do the opposite to reinstall. Hope this helps and best of luck. If anymore issues, reachout on here and ask or try to msg me on here ill help if i can.
on Jul 22, 2019
My yamaha grizzly 350 avt just clicks not starting
Clicking sound from the starter relay in my many years at a dealership is usually a sign of low battery voltage. Starter failure is an amature guess.. yes why though possible extremely unlikely.. easy steps before just being a parts replacer.... first make sure battery is charger. If battery is charged that does not mean it has 12 volts when a load is applied it only means it's full charged but doesnt mean its good..hook up jumpers to a known good battery (IMPORTANT) if you use a car or a truck that's fine just do NOT START the vehical connected. ATV cant handle the amperage from the alternator.. if it starts it a bad battery.. if it still clicks the starter can be tested as well as making sure the motor isnt seized. Test and continue to test.
on Jul 14, 2019
Not finding what you are looking for?