20 Most Recent Kymco 2010 UXV 500 4x4 Questions & Answers


Same problem with my mxu 500. Charged battery. Nope. Checked all connections in starting system. Nope. Swapped out solenoid relay. Fixed mine. Was cheap online- less than $20. Mine would start with jumper cables or batt charger on 80amp boost. Good luck!

Kymco 2010 UXV... | Answered on Feb 13, 2020


belt slipping needs new one as it wears jus the edges

Kymco 2010 UXV... | Answered on Sep 24, 2014


try google or a dealer

ATVs | Answered on Jun 27, 2020


To me it sounds like, possible fuel lines being clogged and maybe need replaced. If you can prime it, and it ??s for 5 to 10 seconds, sounds like its just not getting fuel fast enough or at all through the lines after the initial prime and fire up. Possibly a new fuel pump may be needed. But definitely a fuel system problem. Good luck

ATVs | Answered on Jun 18, 2020


Check for water in the fuel. Also check the carburetor bowl for fuel. You can disconnect the fuel line at the valve and run a bit of fuel out, make sure to run in both on and reserve position. The carb has a small fathead screw for a drain. Back it out a few turns to release the content of the bowl. Also check the air filter under the seat. Make sure it’s clean.

ATVs | Answered on Jun 16, 2020


Hi, Ken for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Polaris, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://atvconnection.com/forums/polaris/223265-bypass-reverse-override-awd.html
https://www.youtube.com/watch?v=hKmVUQknHMo
https://www.manualslib.com/manual/131491/Polaris-Sportsman-9922242.html#product-Sportsman%20300%202010
https://polaris-atv.brssm.com/2010-Polaris-Sportsman-300-Service-Manual.html
https://www.polarispartshouse.com/oemparts/l/pol/50358435f870023684112c8e/2010-sportsman-300-4x4-a10lh27ax-az-parts

ATVs | Answered on Jun 06, 2020


Hi, Claude the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts enquiry.
Good luck and have a wonderful day.

ATVs | Answered on Jun 06, 2020


Hi, Bill for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Polaris, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.prcforum.com/threads/glacier-pro-plow-problems.59001/page-2
https://www.youtube.com/watch?v=rfenEJN_5mw
http://quads.ddns.net/service-manuals/polaris/
https://atv.polaris.com/en-us/self-help/article/KA-01323/
https://www.polaris.com/en-us/owners-manuals/

ATVs | Answered on Jun 06, 2020


Duplicate question already answered

ATVs | Answered on Jun 06, 2020


Hi, JMF for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Polaris, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?source=univ&tbm=isch&q=Wiring+diagram+for+ECM+on+2006+Polaris+Sportsman+450&sa=X&ved=2ahUKEwiX0OXk0-3pAhXQl-AKHSrWB2EQsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=YLT5u2KoTgs
https://www.manualslib.com/manual/909394/Polaris-2007-Sportsman-500-Ef.html
https://www.polarispartshouse.com/oemparts/l/pol/503530fcf87002368411124c/2006-sportsman-450-a06mh46aa-parts
https://www.manualslib.com/manual/131453/Polaris-Sportsman-450.html

ATVs | Answered on Jun 06, 2020


Hi, Todd parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalogue or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Polaris, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://snowparts.ru/manuals/Polaris%20Trail%20600-900%20RMK%20Switchback%20Service_Manual_2005.pdf
https://www.babbittsonline.com/oemparts/l/pol/50378744f87002368411ec37/2005-900-switchback-s05ps8ds-parts
https://snowmobiles.polaris.com/en-us/owners-manuals/

ATVs | Answered on Jun 06, 2020


Utube has info. But test it first at a partstore..may b bad alternator or regulator. When chargd its 12.6 not 12

ATVs | Answered on Jun 06, 2020


Hi, Anonymous you need to repost your question under the Winch category, not ATV. Thanks, Gregg

ATVs | Answered on Jun 06, 2020


Hi, Ethel for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Polaris, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.prcforum.com/threads/2011-ranger-800-xp-eps-steering-problem.112009/
https://www.youtube.com/watch?v=0OSRCu2VU1Q
https://www.manualslib.com/manual/1069103/Polaris-2010-Ranger-Rzr-800-Efi.html
https://www.polarispartshouse.com/oemparts/l/pol/5036283bf87002368411626e/2010-ranger-4x4-800-efi-crew-r10wh76ag-ah-ar-av-wy76aw-az-parts
https://www.manualslib.com/manual/740993/Polaris-Ranger-800.html

ATVs | Answered on Jun 06, 2020

Not finding what you are looking for?
Kymco 2010 UXV 500 4x4 Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Kymco ATVs Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23424 Answers

Kardoc

Level 3 Expert

5889 Answers

Are you a Kymco ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

UXV 500 4X4 Kymco

  • UXV 500 4X4 Kymco

Most Popular Question

kymco uxv 500 wont start no matter but

  • ATVs
Loading...