20 Most Recent kawasaki 2005 Bayou 250 Questions & Answers

what year ? 1999 should be 15 to 20 mm intake on exh 18 to 23 mm i think depending on year. they run tight. adj at tdc on comp stroke with valves open far as they can. have to rotate eng for each valve to open fully and independently one opens and other closes at same time. should be very quiet if adj correctly.adj the closed valve only when fully closed

kawasaki 2005... | Answered on Feb 21, 2019

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manual works fine .

kawasaki 2005... | Answered on Feb 08, 2019

google your model for schematics and locations of parts.

kawasaki 2005... | Answered on Feb 05, 2019

Order the service manual directly from the manufacturer/distributor.

kawasaki 2005... | Answered on Jan 13, 2019

Did you check the frame rail by your left toe? it may have been painted over.

kawasaki 2005... | Answered on Jan 02, 2019

buy a replacement barrel and key off ebay,be lots easier

kawasaki 2005... | Answered on Dec 31, 2018

I suggest you check the exhaust isn't partially blocked and then if OK ensure the cam timing, valve clearances, etc. is correct.

kawasaki 2005... | Answered on Nov 26, 2018

Have you tried to lower the idle? When an Auto/5speed shiftable transmission is stopped in gear the drivetrain holds it back or loads it down a bit. If you take off a load the idle will rise. Sounds like your idle is too high. Do you have your idle set high to keep it from stalling?

kawasaki 2005... | Answered on Jan 02, 2018

the solenoid has gone bad most likely. if that checks ok, could be the keyswitch, kill switch or neutral safety switch.

kawasaki 2005... | Answered on Dec 03, 2017

a large hammer and lots of effort. if the center has come out you can cut the outer ring with a dremel cutting disc.

kawasaki 2005... | Answered on Nov 29, 2017

T is usually the mark on the flywheel and there's usually a mark on the cam sprocket and head to line up. you can google up a service manual too most likely.

kawasaki 2005... | Answered on Oct 22, 2017

How do you know they are gas lines? Are they the same diameter? Why are they not still connected?
Does this ATV have a fuel pump? If so they probably connect to the pump.. one is the fuel line and one is a vacuum line... the other probably an overflow.

kawasaki 2005... | Answered on May 31, 2017

clean your carb, check for compression.

kawasaki 2005... | Answered on Mar 05, 2017

Depending on the amount of metal in the oil would dictate the seriousness of the issue. A little is ok in most cases in the first few oil changes, but anything more than that and there is something wrong with the engine. In most cases this would mean a total rebuild.

kawasaki 2005... | Answered on Nov 03, 2016

Not finding what you are looking for?
kawasaki 2005 Bayou 250 Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki ATVs Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

Glenn Smart
Glenn Smart

Level 3 Expert

830 Answers


Level 3 Expert

85239 Answers

Are you a kawasaki ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bayou 250 kawasaki

  • Bayou 250 kawasaki

Most Popular Question

found silver flakes in oil while

  • ATVs