20 Most Recent Polaris ATV - Page 5 Questions & Answers


try resetting codes by removing both battery cables then touch them together away from battery terminals. then reconnect cables and start to see if it has same codes. not a valid code according to polaris code list

Polaris ATV | Answered on Feb 21, 2019


41 ,45 not a valid code polaris codes start w , pxxxx then 4 digits follow the p. at least thats what i know they have listed.

Polaris ATV | Answered on Feb 21, 2019


out of gas ? fire at spark plug ? what have you checked so far ?

Polaris ATV | Answered on Feb 21, 2019


P16A8 This Trouble Code sets if the Injector Output Supply 2 Voltage is below an acceptable limit. Can be caused by Damaged Wiring or Faulty/Shorted Connectors.
ECU Output Supply Voltage

Polaris ATV | Answered on Feb 21, 2019


Order the service manual directly from Polaris.

Polaris ATV | Answered on Feb 20, 2019


fuel system clogged someplace or bad fuel in tank

Polaris ATV | Answered on Feb 20, 2019


light sw shorted . replace or clean connections in sw. may have bare wires but sw is prolly corroded

Polaris ATV | Answered on Feb 20, 2019


u plug what in ? i dont understand question. put it in neutral turn sw on not off. turn gas on pull compression release and pull rope to start. how new is this atv .may have key may not. check owners manual if u have one or go online and get one for your atv that will help you when starting.

Polaris ATV | Answered on Feb 20, 2019


If you have a spark and it will start on starting fluid it is a fuel problem. If not you have a ignition problem. Check all switches and connections. Check neutral safety switch.

Polaris ATV | Answered on Feb 17, 2019


having same prob with my preditor 500 any advice

Polaris ATV | Answered on Feb 16, 2019


I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manual works fine .

Polaris ATV | Answered on Feb 12, 2019


most likely a bad sending unit in the fuel tank replace it

Polaris ATV | Answered on Feb 12, 2019


sounds like something is shorted to ground probably
got a shorted stator take the three yellow wires coming
off the stator and check if any of the three are grounded out if any of them does replace stator

Polaris ATV | Answered on Feb 12, 2019


what is it doing? you said starting. like is it not cranking over? because you mentioned the charging system.
or is it not firing up when it cranks over? because you also mentioned starting system.

Polaris ATV | Answered on Feb 12, 2019


Remember it is only a 250 but a couple things will cause that problem I have found that 2 stroke engines tend to stop up the exhaust pipe try taking it off replace it with a shorty pipe to test it if it runs like a striped ape the pipe is probably stopped up take out the baffle and clean pipe and muffler good reassemble
then there is the chance that it is low on compression this would constatute a top end rebuild

Polaris ATV | Answered on Feb 12, 2019

Not finding what you are looking for?
Polaris ATV Logo

4,075 questions posted

Ask a Question

Usually answered in minutes!

Top Polaris ATVs Experts

john h

Level 3 Expert

23401 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brandon Hunter

Level 2 Expert

71 Answers

Are you a Polaris ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Polaris ATVs

  • Polaris ATVs

Most Popular Question

2012 ranger 400 4x4 not engaging front

  • ATVs
Loading...