Richard Slade posted an answer for this Heating & Cooling:
"Hi, If the unit is on heating mode, the inside coil has to reach a predetermend..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Ken, I hope the following link will help you? Good..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Rismita, I hope the following link is helpful for you Good..."
Richard Slade posted an answer for this Fujitsu ASU30CLX1 Single Zone Wall Ductless Indoor Unit Air Handler:
"Hi Karl, I hope the following links is helpful to you Good..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Russell, I hope the following link is of some help to you Good..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Mark, I hope the following link is of some help for you? Good..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Rajneel, I hope this link is of some help to you Good..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, E3 on an some brands of air conditioners means faulty indoor coil thermistor, either..."
Richard Slade posted an answer for this Fujitsu Heating & Cooling:
"Hi Pat, If you have a digital camera ie: cell phone - aim the remote at the camera and..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, E4: Indicates lack of refrigerant, or the compressor is not running, or the thermistor..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, 212 Comms Error between Outdoor Unit and HR Box No3. 1. Defective..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, I think the reversing valve coil is malfunctioning - either the settings to select..."
Richard Slade posted an answer for this Carrier Heating & Cooling:
"Hi Anonymous, For all wall mounted and Artcool split system codes Error code = C1 or..."
Richard Slade posted an answer for this LG LS-L1210CL Mini Split Air Conditioner:
"Hi Tammie, Look for a date of manufacture on the outdoor unit label, usually located near..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi Jim, Reverse cycle split air conditioners should pump out at least 5 degrees C on..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, have you checked the condition of outdoor coil sensor? Maybe short or open..."
Richard Slade posted an answer for this Heating & Cooling:
"Hi, usually indoor sensor problem - both coil and air sensors need to have their..."
Richard Slade posted an answer for this Heating & Cooling:
"If you have a digital camera or phone camera - check there is a light flashing from the..."
Richard Slade posted an answer for this Amana Heating & Cooling:
"Have you checked the reversing valve coil? Is the compressor running? I am an 'Old Refrig..."
Richard Slade posted an answer for this Heating & Cooling:
"Hey, I hope you didn't spend too much on the repair man? Most of the time when these units..."
Richard Slade posted an answer for this Heating & Cooling:
"ihave a mistral air condition (split system) model number mss65ss. i need the wiring..."
Richard Slade posted an answer for this Heating & Cooling:
"Have a look inside the fascia of the indoor Good luck"