sewtexas posted an answer for this Sewing Machines:
"The serger came with a tool just for that purpose. It may be a small screwdriver or it..."
sewtexas posted an answer for this Singer 14SH654:
"Be sure you have new needles inserted correctly, threaded in order loopers then needles,..."
sewtexas posted an answer for this Janome 7034D Sewing Machine:
"If machine speed is not controllable with your foot controller, you probably need a new..."
sewtexas posted an answer for this Singer Inspiration 4228 Mechanical Sewing Machine:
"Make sure the needle is inserted correctly and in good condition. Should change needle any..."
sewtexas posted an answer for this Singer 7444 Mechanical Sewing Machine:
"this is my second machine, the first one did this same thing: worked for about a month..."
sewtexas posted an answer for this Singer 7444 Mechanical Sewing Machine:
"sounds like a timing problem, machine is very difficult to get to timing access. Suggest..."
sewtexas posted an answer for this Singer 132QRFB Mechanical Sewing Machine:
"When I start the machine sprk and smoke is coming from the motor. where can I repair it?."
sewtexas posted an answer for this Singer 132QRFB Mechanical Sewing Machine:
"check singerco.com for service center nearest you"
sewtexas posted an answer for this Singer 7422:
"Hi, I have just bought a Singer Style-O-Matic 328 Circa 1950. I am having a problem with..."
sewtexas posted an answer for this Singer 7422:
"Try a new needle, confirm needle is inserted correctly, needle flat side to back of..."
sewtexas posted an answer for this Euro-Pro 9105 Computerized Sewing Machine:
"I have a Singer 258 sewing machines that runs very slowly. How do I adjust the speed so it..."
sewtexas posted an answer for this Euro-Pro 9105 Computerized Sewing Machine:
"There is no speed adjust, but 1st you must know the source of the slow down. Remove the..."
sewtexas posted an answer for this Singer 6038 Mechanical Sewing Machine:
"The thread holder is broken and I have got a new one. To fix it, I need to open the case..."
sewtexas posted an answer for this Singer 6038 Mechanical Sewing Machine:
"There are hidden plastic snaps inside the seams of the front and back shells of this..."
sewtexas posted an answer for this Singer Quantum XL-1000 Computerized Sewing Machine:
"After turning on machine,,touch screen wont navagait."
sewtexas posted an answer for this Singer Quantum XL-1000 Computerized Sewing Machine:
"Need touch screen replaced. Take to singer service center. Listing at singerco,com."
sewtexas posted an answer for this Singer Sewing Machines:
"need timing belt replaced sounds like a series 700 singer, big job not to be done by..."
sewtexas posted an answer for this Singer CE-100 Futura Computerized Sewing Machine:
"take or send to singer service person. it has electronic problems and they are difficlut..."
sewtexas posted an answer for this Singer Sewing Machines:
"no, retiming a serger i cannot explain. needs to be done by trained sewing mahcine..."
sewtexas posted an answer for this Singer 3116 Simple:
"if not under warranty, time to invest in another better machine, stay out of big box..."
sewtexas posted an answer for this Singer Sewing Machines:
"down"
sewtexas posted an answer for this Singer Sewing Machines:
"[email protected] they carry the genuine singer belt, it is black"
sewtexas posted an answer for this Singer 7422:
"they snap together and apart, you'll think you are going to break the plastic shell and..."
sewtexas posted an answer for this Singer CE-200 Quantum Futura Computerized Sewing Machine:
"if your new computer is 64 bit, you'll need to call singer 800 4 singer. I have yet to..."
sewtexas posted an answer for this Singer CE-100 Futura Computerized Sewing Machine:
"Being simple minded as i am, if your singer ce100 works the stitch looks good just be glad..."
sewtexas posted an answer for this Singer CE-200 Quantum Futura Computerized Sewing Machine:
"the patch must be installed beore the other programs are loaded, then it should work,..."
sewtexas posted an answer for this Singer Sewing Machines:
"49.95 [email protected]"
sewtexas posted an answer for this Singer 3116 Simple:
"botton near the bobbin case area, stamped in metal base"
sewtexas posted an answer for this Singer CE-100 Futura Computerized Sewing Machine:
"check threading on upper thread, if correct then there is sensor error and must be taken..."
sewtexas posted an answer for this Singer Sewing Machines:
"try looking on bottom of machine, should be a flat where serial number is stamped"
sewtexas posted an answer for this Singer 132QRFB Mechanical Sewing Machine:
"sounds like you have a cabinet model, yes this machine requires either a foot or knee..."