Press enter to search.
P McD posted an answer for this Brother GX-6750 Typewriter:
"The user's manual says it only has the capacity for 10 and 12 pitch. 12 pitch is the..."
P McD posted an answer for this Pontiac Cars & Trucks:
"I would refer you to this link http://www.obd-codes.com/p0122. Hope this helps."
P McD posted an answer for this Brother GX6750 Typewriter:
"It sounds as if the wheel could be broken in the area that seats it correctly (sometimes a..."
P McD posted an answer for this IBM Wheelwriter 30 Typewriter:
"This one sounds like the keyboard may have some issues. If so, it is not something you..."
"The font size is changed by changing the printwheel. The pitch selection is automatically..."
"Make sure the correction tape is non-tacky. Tacky lift-off is for the old Selectric..."
"It sounds like a jam. Check to make sure the ribbon and correction tape are not jamming..."
P McD posted an answer for this Nakajima AX-150 Typewriter:
"I believe Nakajima is the manufacture. They also make the Swintec brand which is..."
P McD posted an answer for this IBM Office Equipment & Supplies:
"If it is a IBM Selectric model, check the element (ball) to see that a tooth is not..."
P McD posted an answer for this Smith Corona Refurbished Super Sterling Porable, Electric Typewriter, Case, W/wa:
"It could be the machine is trying to return but is not successful. Help the carriage by..."
P McD posted an answer for this Office Equipment & Supplies:
"This can mean that the spacebar is not being tapped hard enough, the spacebar is sticky,..."
P McD posted an answer for this Olympia Office Equipment & Supplies:
"It sounds as either the tab didn't knock off or the tab stop has been knocked out of place..."
"If you pull the carriage release lever and it does not budge, then you need it serviced. ..."
P McD posted an answer for this Brother SX-4000 Typewriter:
"First make sure it is installed correctly as well as the ribbon. If they are not in their..."
"It is trying to find home position. It make not be locked in properly. If you are..."
"Normally, you must set the carrier or scale where you want it set on the left then press..."
"Not enough information, really. We don't know the model or just exactly what you mean by..."
"The question is a little confusing. If you mean the actual characters on the right side..."
P McD posted an answer for this Brother EM-530 Typewriter:
"First check that your right margin is not set before the tab. Your margin could be..."
P McD posted an answer for this Brother ML-100 Typewriter:
"If the plastic is packaging, do remove it. The printwheel should be inserted as a black..."
"Usually beeps indicate an error either in operation or that the typewriter cannot complete..."
P McD posted an answer for this Swintec 7040 Typewriter:
"Your description of plastic is not clear. If you mean the plastic case it comes in, then..."
P McD posted an answer for this Smith Corona Office Equipment & Supplies:
"You may have bad feed rollers, or they may not be engaging the platen as they should for..."
P McD posted an answer for this Royal Office Equipment & Supplies:
"The mainspring is not bad or the carriage would not move that way. It sounds like and..."
"First check if the paper release lever is pulled, thus releasing the tension on the..."
"If the strap or cord actually broke, you have to know what you are doing. The strap..."
"I am not familiar with the R300 specifically, but some common problems with this can be a..."
"I have witnessed many times that the supplies from certain vendors do not do as well as..."
P McD posted an answer for this Vivitek D825MS Projector:
"I am not able to get sound out of the projector. I have the proper cords attached. I am..."
"The Vivitek D825MS Projector does not have any speakers of its own. You have to use..."
Load more activity...
15,900 people helped
View all achievements