GENERAL KNOWLEDGE AND SHORT CUT REPAIRS
Andy Bell posted an answer for this Ricoh Office Equipment & Supplies:
"The error is for the ITB(transfer belt) lift motor and sensors, if you know the machines..."
Andy Bell posted an answer for this Ricoh Aficio 450 Copier:
"To enter the SP press Yellow clear button top of dial pad and enter 107 then hold red stop..."
Andy Bell posted an answer for this Ricoh Aficio 2035 Copier:
"This is an error code for the RFID which is the toner bottle chip on the the toner..."
Andy Bell posted an answer for this Ricoh Aficio 2035 Copier:
"This machine doesn't have a waste toner bottle, the waste toner is collected in the..."
Andy Bell posted an answer for this Ricoh Aficio 450 Copier:
"This is a common problem on older ricoh with high counts the unit has a connector at..."
Andy Bell posted an answer for this Ricoh Aficio 450 Copier:
"This is a common problem on older ricoh with high counts the unit has a connector at..."
Andy Bell posted a question about Office Equipment & Supplies:
"kyocera error F226"
Andy Bell posted an answer for this Shure Beta 57A Professional Microphone:
"My Shure beta 57a went dead one night and I found out there was a short. Someone soldered..."
Andy Bell posted an answer for this Shure Beta 57A Professional Microphone:
"Open it back up sounds like when you resoldered the cable you may have crossed onto..."
Andy Bell posted an answer for this Gestetner DSc224 Copier:
"wat does it mean if the machine is saying toner cartridges not set properly"
Andy Bell posted an answer for this Gestetner DSc224 Copier:
"the main reason for this could be when you replaced the toner cartridge you have either..."
Andy Bell posted an answer for this Ricoh Aficio 450 Copier:
"thermistor error in the fuser unit, could have toner build up on surface of sensor. take..."
Andy Bell posted an answer for this Ricoh Aficio 450 Copier:
"what SC 541 is ?"
Andy Bell posted an answer for this Gestetner DSc338 Color Copier:
"Hi the error code 560 is for the BCU which is a control board for the machine it is not..."
Andy Bell posted an answer for this Gestetner DSc338 Color Copier:
"my problem is my photocopy is not working it says functional problem within the copier..."
Andy Bell posted an answer for this Ricoh Aficio 1232C Color Copier:
"Hi first have you installed the correct Mac drivers the default drivers would be winds and..."
Andy Bell posted an answer for this Ricoh Aficio 1232C Color Copier:
"I'd like to print from a Mac (OS 10.4) but instead of printing the requested page, it..."
Andy Bell posted an answer for this Brother IntelliFAX 4750 Plain Paper Laser Fax:
"FIRST I would check the scanner glass again you can test it by asking for a report to be..."
Andy Bell posted an answer for this Brother IntelliFAX 4750 Plain Paper Laser Fax:
"when faxing a paper and the recipient receives the fax, their copy has a wide black lines..."
Andy Bell posted an answer for this Panasonic DP-8020E Black and White Copier:
"http://panasonic.net/pcc/support/mfp/dp-8020/index.html...FOLLOW LEAD TO SITE IT HAS ALL..."
Andy Bell posted an answer for this Panasonic DP-8020E Black and White Copier:
"i want panasonic DP 8020E drive that runs on window 7"
Andy Bell posted an answer for this Brother IntelliFax-2820 Laser Fax:
"http://www.brother.com/E-ftp/model/winxptemp.htm>>follow this to the site it will..."
Andy Bell posted an answer for this Brother IntelliFax-2820 Laser Fax:
"How to download the Drivers"
Andy Bell posted an answer for this Bose Lifestyle SA-1 Amplifier:
"check the maplin site maplin.uk they ahve a catalogue of connectors and cableing"
Andy Bell posted an answer for this Bose Lifestyle SA-1 Amplifier:
"i have a bose ta 1 theater amp i need adapters and wires to connect subwoofer and center..."
Andy Bell posted an answer for this Canon C3380i Color Copier:
"We are printing 2 sided agendas which contain 44 pages each. The print from the first..."
Andy Bell posted an answer for this Canon C3380i Color Copier:
"ia the paper you are using heavy or velum textured some papers with a textured surfaces..."
Andy Bell posted an answer for this JVC Gumy Ear Bud Headphone - Peppermint Blue:
"None of the ear pieces work only if I move around the Jack plug thing"
Andy Bell posted an answer for this JVC Gumy Ear Bud Headphone - Peppermint Blue:
"sounds like the jack is faulty tghe cable has been pulled and the wire probably stripped..."
Andy Bell posted an answer for this Panasonic Workio DP-3520 Copier:
"We have a Panasonic PD-3520 setup with a static IP Address and attached to our companies..."
Andy Bell posted an answer for this Panasonic Workio DP-3520 Copier:
"check the subnet mask address and also if it is going through a router this will have to..."