I sew because I can
lil sandling posted an answer for this Janome Sewing Machines:
"Contact [email protected]. Matt can 3d print one."
lil sandling posted an answer for this Sewing Machines:
"need more information"
lil sandling posted an answer for this Sewing Machines:
"make sure the bobbin is threaded correctly and the needle is inserted correctly. I..."
lil sandling posted an answer for this Kenmore Sewing Machines:
"are the feed dogs up? is the stitch length more than Zero? is it set on the button hole..."
lil sandling posted an answer for this Sewing Machines:
"using a magnetic screw driver helps a lot"
lil sandling posted an answer for this Sewing Machines:
"needs cleaned and oiled"
lil sandling posted an answer for this Sewing Machines:
"Add a picture of your machine I can help"
lil sandling posted an answer for this Sewing Machines:
"if your machine has a clutch in the center of the turn wheel you must loosen it to..."
lil sandling posted an answer for this Brother Sewing Machines:
"All machines are different but generally tension is set looser."
lil sandling posted an answer for this Singer Sewing Machines:
"TAKE IT BACK"
lil sandling posted an answer for this Sewing Machines:
"Post a picture please but sounds like a tension issue. Also note very few machine stitch..."
lil sandling posted an answer for this Sewing Machines:
"Make and Model of sewing machine? Picture of foot peddle please."
lil sandling posted an answer for this Brother 1034D Serger Sewing Machine:
"It maybe electrical? Is it out of warranty? Does the light come on? Does it make any..."
lil sandling posted an answer for this Sewing Machines:
"I guessing you mean how to raise the feed dogs. In my experience the lever is probably..."
lil sandling posted an answer for this Elna Sewing Machines:
"check to see if the feed dogs are up or if you have stitch length set to small"
lil sandling posted an answer for this Sewing Machines:
"That model dose not appear to have one. I own an earlier one it doen't either."
lil sandling posted an answer for this Sewing Machines:
"check threading through the tension. this generally mean you have tension too loose or..."
lil sandling posted an answer for this Brother Sewing Machines:
"yes they do. but how about any pre tension is it set too high..is it stitching okay?"
lil sandling posted an answer for this Necchi Sewing Machines:
"if you have a drop in the thread should fall off to your left hand when holding it up. ..."
lil sandling posted an answer for this Kenmore Sewing Machines:
"what is the problem?"
lil sandling posted an answer for this White Sewing Sewing Machines:
"go to sinco.com they can help with dating and a manual"
lil sandling posted an answer for this Elna Sewing Machines:
"https://youtu.be/-6XtoguTBhc"
lil sandling posted an answer for this Singer Sewing Machines:
"you probably have a loose connection or a small hole in the hose to the air foot"
lil sandling posted an answer for this Kenmore Sewing Machines:
"
Can you add a picture of your machine"
lil sandling posted an answer for this Elna Sewing Machines:
"Go to you tube. This video should help https://youtu.be/-3SHobQZLJk"
lil sandling posted an answer for this Bernina Sewing Machines:
"Are the feed dogs up"
lil sandling posted a question about Sewing Machines:
"Need directions westrim Mini Branch looper for beaded tree"
lil sandling posted an answer for this Brother LS-2125 Mechanical Sewing Machine:
"Use a small ruler set the needle down on the size of seam you need then lower the presser..."
lil sandling posted an answer for this Sewing Machines:
"A hem gauge foot is adjustable and can aid with small seams"
lil sandling posted an answer for this Sewing Machines:
"What machine"
lil sandling posted an answer for this White Sewing Speedylock 1600 Mechanical Sewing Machine:
"most serger thread the same way loopers then needles I have 4 different brands and..."