2
russ davis posted an answer for this GMC Cars & Trucks:
"I know this is an older post, but I'll try to give an answer anyway... Try hooking up a..."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"The following were 'copied and pasted from repair pal. Hope they help.
Oxygen..."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"It's located INSIDE of the distributor. Take a look at the following video. Hope..."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"To attach the sun visor to the cab roof it SHOULD be attached with 3 phillips head screws...."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"If you're talking about the oil pressure sender, it's located back by the ignition..."
russ davis russ davis posted an answer for this Buick Cars & Trucks:
"It would help if you stated WHICH engine you are trying to work on. 4 cylinder or V6?"
russ davis russ davis posted an answer for this Pontiac Cars & Trucks:
"Same engine as is in the following link; Firing order for 91 chevy s10 2 8 1991 Chevrolet..."
russ davis russ davis posted an answer for this Chevrolet Cars & Trucks:
"IF I'm not mistaken it should be 216 cu. in."
russ davis russ davis posted an answer for this Chevrolet Cars & Trucks:
"I had pretty much the same thing happen on a 1991 S10 with the 4.3. I thought for sure it..."
russ davis russ davis posted an answer for this Cars & Trucks:
"Maybe i missed it. What kind of vehicle?"
russ davis 
russ davis posted an answer for this 1991 Chevrolet C1500:
"So when you say 'it will not close' do you mean it won't stay latched or does it 'bang' as..."
russ davis 
russ davis posted an answer for this 2001 Chevrolet S-10:
"I'm assuming it's an automatic. That being said I'm also guessing it's a V6 with a..."
russ davis russ davis posted an answer for this Cars & Trucks:
"Best guess is the leads are off by one terminal. I have found that whatever was touched..."
russ davis russ davis posted an answer for this Oldsmobile Cars & Trucks:
"So no solenoid click or anything? IF the solenoid at least clicks but the starter don't..."
russ davis russ davis posted an answer for this Oldsmobile Cars & Trucks:
"I take it the reason the bearings were changed is because of the shaking or were they..."
russ davis 
russ davis posted an answer for this 1999 Buick LeSabre:
"I'm going to advice to purchase a new socket as it sounds like yours has overheated and..."
russ davis 
russ davis posted an answer for this Audio Players & Recorders:
"Try moving the speed switch from the 33 1/3 position to the 45 position. Hope this helps."
russ davis russ davis posted an answer for this Cars & Trucks:
"What about it? I'm sorry my crystal ball is broken and my tea leaves are too dry to..."
russ davis russ davis posted an answer for this BMW Cars & Trucks:
"Did you use LED replacement bulbs or standard bulbs? If you used LEDs then THAT'S you..."
russ davis 
russ davis posted an answer for this Air Tools & Compressors:
"Sounds like you're on the right track if you're sure there's not a fuel problem. It may..."
russ davis 
russ davis posted an answer for this 2000 Mercury Cougar:
"Take off the lug nuts and if the wheel doesn't want to come off you may have to give it a..."
russ davis russ davis posted an answer for this Pontiac Cars & Trucks:
"Yes a broken chain could sound like and cause a 'no start' condition. Unfortunately I..."
russ davis 
russ davis posted an answer for this 1999 Pontiac Montana:
"There should only be 1 bolt holding the arm in place and it should be accessible from the..."
russ davis 
russ davis posted an answer for this 2005 Chevrolet Tahoe:
"Did you check the front shields also. Had a lady going into a tizzy one time with pretty..."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"I don't know if you're attempting to read with your own code reader or if you're going..."
russ davis russ davis posted an answer for this Oldsmobile Cars & Trucks:
"If I'm thinking correctly, it should be located on top of the transmission/transaxle where..."
russ davis russ davis posted an answer for this Chevrolet Cars & Trucks:
"If you're not getting power to anything when this happens then I would tend to think is a..."
russ davis russ davis posted an answer for this Chevrolet Cars & Trucks:
"If you're not losing any brake fluid then it sounds to me as though the master cylinder is..."
russ davis 
russ davis posted an answer for this 2004 Chevrolet Malibu:
"Yes it could. But BEFORE you purchase an EGR valve I would look at this video AND read the..."
russ davis russ davis posted an answer for this 1996 GMC Suburban:
"The ECT should be located near the thermostat housing, screwed into the intake manifold...."
russ davis russ davis posted an answer for this GMC Cars & Trucks:
"It sounds as though you have either a frayed wire between the brake control circuit and..."
russ davis 
Cars & Trucks 150 answers
Air Tools & Compressors 14 answers
Audio Players & Recorders 1 answer
Computers & Internet 1 answer
Irons 1 answer
Washing Machines 1 answer
Vacuums 1 answer
