1
Jason Depew posted an answer for this Bernina Sewing Machines:
"This is a difficult material for any machine to sew on. Try using a ballpoint needle. This..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"Sometimes the touch screens can get accidentally re-calibrated incorrectly, and then will..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"Be sure that your dongle is plugged into the computer when you boot the software. If it is..."
Jason DepewJason Depew posted an answer for this Bernina Activa 130:
"There is one screw on the bottom of the machine in the center of the handwheel end. Remove..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"It sounds like your top thread is not properly placed in the tension unit. Try retreading...."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"Over time the oil in the machine will evaporate or denature, if the machine has not been..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"The back panel on the BERNINA 1080 is not removable. These machines are cast metal, and..."
Jason DepewJason Depew posted an answer for this Bernina Artista 180:
"There is a way to adjust this though it is quite labor intensive and takes some..."
Jason DepewJason Depew posted an answer for this Bernina Activa 140:
"Try using a walking foot. The issue most quilters face when working with any sewing..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"I know this is an old question, but for anyone looking for an answer to this, the spindle..."
Jason DepewJason Depew posted an answer for this Sewing Machines:
"This should be it. Foot Control Cord Singer 979314 031"
Jason Depew
Jason Depew posted an answer for this Brother SE400 Computerized Embroidery and Sewing Machine:
"It is likely that your feed dogs have been dropped. Try following the instructions listed..."
Jason Depew
Jason Depew posted an answer for this Brother PE-500 Embroidery Machine:
"Try replacing the needle, and rethreading your machine. This will often solve this issue...."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"While the surge protector is an excellent thing to use, BERNINA sewing machines also have..."
Jason DepewJason Depew posted an answer for this Sewing Machines:
"The Morse 4300 typically uses a standard 15 watt screw in style sewing bulb. Just like the..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"The BERNINA 153 is an outdated model. As such, any BERNINA 153 you find for sale will..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"The short answer is to get it serviced at a BERNINA dealer and repair center. To reset the..."
Jason DepewJason Depew posted an answer for this Bernina Artista 180:
"It is very likely that when you attempted to connect the embroidery unit with the plug out..."
Jason DepewJason Depew posted an answer for this Bernina Artista 170:
"Yes, The BERNINA Artista 180 and the BERNINA Artista 170 do in fact use the same..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"There are a few things that could be happening here. The first thing is to check your..."
Jason DepewJason Depew posted an answer for this Bernina Sewing Machines:
"There are a few possible issues that could cause this. Over time the carbon contacts..."
Jason DepewJason Depew posted an answer for this Janome Memory Craft 10000:
"My gut instict is to say that you may have a faulty presser foot position sensor. If this..."
Jason DepewJason Depew posted an answer for this Sewing Machines:
"Make sure that the machine is properly threaded, and that each thread is properly seated..."
Jason DepewJason Depew posted an answer for this Janome Memory Craft 10000:
"My gut instict is to say that you may have a faulty presser foot position sensor. If this..."
Jason DepewJason Depew posted an answer for this Janome Memory Craft 10000:
"The Janome Memory Craft 11000 does indeed have fuses on the main circuit board. Often, if..."
Jason DepewJason Depew posted an answer for this Janome Sewing Machines:
"As a second opinion, I would first recommend removing the bobbin case and putting it back..."
Jason Depew
Jason Depew posted an answer for this Brother CS6000i Computerized Sewing Machine:
"The bobbin winder tires on most of the new lower to medium end brother machines have a..."
Jason DepewJason Depew posted an answer for this Singer Sewing Machines:
"Machine Serial Numbers Two Letter Prefix lists this machine as being manufactured in 1956"
Jason Depew
Jason Depew posted an answer for this Brother 1034D Mechanical Sewing Machine:
"If you need a replacement front cover, you can order one here: Front Cover Brother..."
Jason DepewJason Depew posted an answer for this Brother Sewing Machines:
"The bobbin winder ring, (the rubber ring which drives the bobbin winder within the..."
Jason DepewJason Depew posted an answer for this Janome Memory Craft 10000:
"It is likely that you did not damage the actual card, but rather the card port on the..."
Jason Depew
Sewing Machines 47 answers
