ian3418 posted an answer for this 2000 Pontiac Bonneville:
"the horn is on drivers side front fender under hood- getting to it is hardest part- you..."
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"yes, if you are working a/c and pass is colder than drivers, you are low on refrigerant...."
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"strart with the basics like plugs and wires - see if improved join Pontiac Bonneville..."
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"hi, try unplugging the Mass airflow sensor on top of throttle body - see if it changes"
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"if its new coil, swap it with another one on the same car and see if it still misses the..."
ian3418 posted an answer for this 1996 Pontiac Bonneville SE CA Value:
"hi, the po301 is a misfire on cylinder #1 first one o the front of engine- check spark..."
ian3418 posted an answer for this Mercury Cars & Trucks:
"take to dealer for reflash of pcm- if not done right, car will not runwell why you want..."
ian3418 posted an answer for this Emerson Go Action Cam 720p HD Digital Video Camera Pro Grade 5 mp:
"internal battery bad- test and replace battery"
ian3418 posted an answer for this Mercury Cars & Trucks:
"inertia switch is prob faulty - bypass it and replace it"
ian3418 posted an answer for this Emerson Go Action Cam 720p HD Digital Video Camera Pro Grade 5 mp:
"hi, sounds like internal battery is bad or going bad- test and replace if its bad"
ian3418 posted an answer for this Honda Cars & Trucks:
"hi, you have a brake line leak- no pressure causes pedal to floor get under and find the..."
ian3418 posted an answer for this Cadillac Cars & Trucks:
"hi, look here for..."
ian3418 posted an answer for this Cars & Trucks:
"hi, please try to change plugs and wires- if problem still there, may be fuel issue"
ian3418 posted an answer for this Cars & Trucks:
"hi, has of electrical issue to be some sort of issue with wires feeding power to that..."
ian3418 posted an answer for this Cell Phones:
"phone has mini usb- does printer have the usb, can printer be used with iphone? what does..."
ian3418 posted an answer for this Maytag Washing Machines:
"hi, the door locks when machine is in a cycle- wait till its over and door will unlock-..."
ian3418 posted an answer for this Computers & Internet:
"hi, use a mouse till you find problem- may be wrong driver or hardware issue"
ian3418 posted an answer for this Computers & Internet:
"yes, you should have vga port- 15 holes in 3 rows on lp you need a vga to rca video in..."
ian3418 posted an answer for this Sport & Outdoor - Others:
"unplug power for 10 minutes - see if resets"
ian3418 posted an answer for this Cars & Trucks:
"what car, year, model? sounds like electronic issue"
ian3418 posted an answer for this Televison & Video:
"make sure sleep timer is off.... does it get hot? there may be electronic problem"
ian3418 posted an answer for this Health & Beauty:
"hi, here is the manual......http://media.thanedirect.com/manuals/body-scale-eng.pdf"
ian3418 posted an answer for this Washing Machines:
"hi, the filter is not sealing good.......take out and redo watching for o-ring damage"
ian3418 posted an answer for this Cars & Trucks:
"hi, vin is at bottom of windshield on drivers side"
ian3418 posted an answer for this 2001 Pontiac Bonneville:
"changing oil pressure sender is less than 1/2 hour job- you can do it yourself -- very..."
ian3418 posted an answer for this 2001 Pontiac Bonneville SSEi:
"its right above oil filter on engine bottom"
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"hi, oil switch sender is right behind filter on engine- I think its 15-17 mm"
ian3418 posted an answer for this 2000 Pontiac Bonneville:
"hi, try to reset vats by putting key in on position for 10 seconds then back to off for 5..."
ian3418 posted an answer for this 1999 Pontiac Grand Am GT:
"get a failsafe thermostat that fails in open condition only also, buy a 165-180 degree..."
ian3418 posted an answer for this 1997 Buick Century:
"head gasket is about 800- 1000 at shop with labour charge= offer 500 or tell him you buy..."