Press enter to search.
An manufactuer trained engineer for 30 years.
Victorman posted an answer for this OKI Office Equipment & Supplies:
"The toners that you have bought are most probably not for your country or have the chips..."
"231 Is a RFID error. I have seen this a few times and can be caused by rf interference. If..."
"You cant find the reset because there is not one. OKI do not use resets to cure errors...."
Victorman posted an answer for this Konica Minolta Office Equipment & Supplies:
"Repost saying EXACTLY what the message is on screen. Its possible the machine will need a..."
"There is no reference to your problem in the C5100 Service manual. I have 17 years..."
"Look for a strip of plastic running the full width of the printer. Its called an encoder..."
"With OKI its a software issue. If you remove a drum and refit it it can screwup the..."
"Doubtful. Usually manufacturers imprint the chip on the cartridge to the specific model..."
"This is a very unusual error. It refers to the internal flash memory. Hold down both menu..."
Victorman posted an answer for this OKI C9600hdn Laser Printer:
"Where the cable plugs into the head often gets toner around it and it shorts the cable and..."
Victorman posted an answer for this OKI B2540 MFP Printer:
"You cannot clear the fax memory as its integral with the main memory. The only way to do..."
"You will find the waste toner auger (Coiled wire in the plastic tube) is either snapped or..."
"Your error refers to the ROS motor in the laser unit. Now this means a new ROS Assy..."
"Fatal Error 928 just means the fuser motor is struggling to turn. The main reason for..."
"480 is not listed in any OKI manual. However the closest to it refers to paper size..."
"Check that the toner cartridge is for your model. Think you have wrong type."
Victorman posted an answer for this Toshiba Satellite Pro S300-S1001 Notebook:
"Not necessarily. Go into bios and set it to default settings. try it then. Update the bios..."
Victorman posted an answer for this OKI MICROLINE 321 Turbo Matrix Printer:
"You do not say how the cards are fed. Are they tractor fed or by sheet feed. I suspect..."
Victorman posted an answer for this Canon Pixma MP500 All-In-One InkJet Printer:
"See Craig Gillette's answer from Feb21,2010. That's your problem too."
Victorman posted an answer for this OKI B6500 Led Printer:
"Basically the machine does not recognise the image drum. You maybe using the Xerox..."
"All you need to do is unlock the scanner. Just open the flatbed cover and on the left edge..."
"It would be unusual for all the colours to go out of alignment. Its probably just black..."
Victorman posted an answer for this OKI B4400 Laser Printer:
"Never use spirit to clean rollers. Just fairy liquid and water. All the roller gets is..."
"I would think you have broken ribbons cables to the cyan and magenta LED print heads. As..."
Victorman posted an answer for this OKIFAX 4580 Plain Paper LED Fax:
"Sometimes the fuse in the drum blows but the printer does not register it so it still..."
"Open the rear cover and in the centre of the curved black guide you will see a small black..."
Victorman posted an answer for this OKI C5800Ldn Led Printer:
"The thin lines are caused by a worn out drum. Remove each drum in turn and look at the..."
"Agree with pcfixup.ca. Remember the software on a pc overrides the printers actual..."
Victorman posted an answer for this OKI C5200n Laser Printer:
"Although the drum life is at 65% it could still have a problem. It could be that the end..."
"You say you have checked properties etc but have you selected mp tray from printing..."
Load more activity...
229,368 people helped
View all achievements