Press enter to search.
Electroboy posted an answer for this Retail Supplies:
"Firstly, make sure there is a Z or Z1 at the top of the report. If it is X or X1, you are..."
"Make sure you have the paper in the correct way around"
"In the programming, you unlink the tax number assigned to that item. It will be in PLU or..."
"In PLU programming in your manual, there is a code for department link where you enter the..."
Electroboy posted an answer for this Uniwell Retail Supplies:
"It needs a RAM clear. See my other answer to your second question for some links"
"Hi. The old Uniwell registers are rare and Uniwell don't give out information for them. I..."
"A dealer can usually read off the clerk login numbers for you. make sure you take proof of..."
"Use 0 then clerk to log out then your new number then clerk to log in."
Electroboy posted an answer for this Towa Retail Supplies:
"There is a site with the Towa listed. Hope it..."
"You need the back office software from the dealer to do this. usually around $500 USD so..."
"Hi. You use the clerk name program code from your manual and enter the new text for the..."
"I assume you mean PCR-T500. You press the receipt on/off button. You may have to press it..."
Electroboy posted an answer for this Samsung Retail Supplies:
"This is a very old model that I haven't seen before. The old ones use codes to change the..."
"Did you sort your problem? Was there any other message on the display?"
"Press VOID button. Then press the item that you want to remove from the sale"
"In department programming, there will be an option to add each tax (tax 1, 2 , 3 etc.)..."
"I'm guessing this is a Casio register in which case you have programmed a condiment to a..."
"The basic machines usually use codes and you need to link to departments as well.
"That's quite a rare model. Try this site for the..."
"try pressing sub total. if it shows an amount, type that amount without decimal point e.g..."
"Turn key to Z mode and press cash"
"They use key codes from the dealer manual to move a PLU with its memory address. You use..."
"Someone has pressed the clerk button so they have logged out of the register. you need to..."
"You have probably turned on a special function for that button. In the program reading..."
"The TE-2400 uses programming sequences from the manual if you want to set it yourself. You..."
"Printer failure. have it checked by a dealer"
"If you have set a cash limit, you'll need to increase or remove it to make large payments...."
Electroboy posted an answer for this Sharp XE-A102 Cash Register:
"Make sure the batteries are not flat. It usually indicates a lack of battery power and it..."
"That's a very rare model. I think programming is the same as..."
"Make sure you have thermal paper (one side should be shiny) and have the shiny side toward..."
Load more activity...
387,211 people helped
View all achievements