Derek Massey posted an answer for this Husqvarna Sewing Machines:
"the problem is probably a broken or cranked takeup crank assembly. They are..."
Derek Massey posted an answer for this Brother PC-420:
"If the machine has been used a fair amount, probably the cutter blade needs replacing. A..."
Derek Massey posted an answer for this Sewing Machines:
"thats a 50 year old machine...its seizing and needs oiling and service"
Derek Massey posted an answer for this Sewing Machines:
"get a book"
Derek Massey posted an answer for this Sewing Machines:
"check to see if your machine is in buttonhole mode, one of the legs of the buttonholer..."
Derek Massey posted an answer for this Sewing Machines:
"Thats a 4 thread serger, you cant do a top stitch unless its a 5 thread"
Derek Massey posted an answer for this Sewing Machines:
"theres a reostat in the machine thats sticking...try a new controller but its probably the..."
Derek Massey posted an answer for this Sewing Machines:
"If you are getting looping on the bottom and want to fix that....check your top tension..."
Derek Massey posted an answer for this Sewing Machines:
"A zipper foot...its usually part of the accessories that come with a machine. Contact your..."
Derek Massey posted an answer for this Sewing Machines:
"Rethread the machine. Its almost always caused by poor quality threads or misthreading."
Derek Massey posted an answer for this Kenmore Sewing Machines:
"You dont say the brand or model. Some units have fuses or a breaker built into the..."
Derek Massey posted an answer for this Lands Phones:
"The problem is likely the upper tension, it sounds like its not bringing the bobbin thread..."
Derek Massey posted an answer for this Brother PC-420:
"The length of the trim is not adjustable on that machine, most arent. Theres a small piece..."
Derek Massey posted an answer for this Baby Lock Sewing Machines:
"You downloaded a toyota dst file. The babylock will embroider the design but it wont..."
Derek Massey posted an answer for this Kenmore Model 385.16126200 Sewing Machine Instruction Manual:
"Make sure your needle is fully inserted to the top of the clamp, dont use anything larger..."
Derek Massey posted an answer for this Sewing Machines:
"Its probably seized or stiff from lack of use. We commonly find this an issue if the..."
Derek Massey posted an answer for this Televison & Video:
"Looking at the pictures it looks like a common generic sewing machine. Bring it to a..."
Derek Massey posted an answer for this Office Equipment & Supplies:
"Only dealers will have a repair manual, talk to one and ask if they will order you a copy...."
Derek Massey posted an answer for this Sewing Machines:
"These acompany called pd60 that carries most obsolite instr4uction manuals. They may sell..."
Derek Massey posted an answer for this Brother LS-1217 Mechanical Sewing Machine:
"this model tends to slip timing quite easy....its about .75 of an hour to fix....a dealer..."
Derek Massey posted an answer for this Sewing Machines:
"sounds like the machine is jammed somewhere...not sure of this solution, probably thread..."
Derek Massey posted an answer for this Husqvarna Viking 1:
"sometimes the cutter doesnt leave a long enough tail to start sewing, and the needle wont..."
Derek Massey posted an answer for this Sewing Machines:
"unthread the machine and bobbin, put the positioner to the up position and run it for a..."
Derek Massey posted an answer for this Singer Confidence 7463 Computerized Sewing Machine:
"its not going to do any good to take the body apart if you dont understand why you need..."
Derek Massey posted an answer for this Singer Confidence 7463 Computerized Sewing Machine:
"Sounds like the foot pedal switch is stuck in the closed position, thats inside the pedal..."
Derek Massey posted an answer for this Sewing Machines:
"Try lifting it past the point it would normally rest at, in the up position. Then if the..."
Derek Massey posted an answer for this Sewing Machines:
"when I attach my embroidery unit to my babylock ellagio, the screen say to rasie the..."
Derek Massey posted an answer for this Juki MO6714 Mechanical Sewing Machine:
"when the seam is tested, from the right side of the garment the thread is visible......"
Derek Massey posted an answer for this Juki MO6714 Mechanical Sewing Machine:
"Try turning the upper tension higher, if its set to 4 then try 6 or so. Make sure its..."
Derek Massey posted an answer for this Husqvarna Sewing Machines:
"Whats the model number and type? A designer with the large touch screen can lose its..."