Anthony Moore posted an answer for this Radio Communications:
"If you already have your codes, go to first channel hit Program, then insert Frequency and..."
Anthony Moore posted an answer for this Uniden Bc340crs Bearcat 100 Channel Police Scanner Base Desk Top:
"Check power source to make sure it is correct voltage/amps"
Anthony Moore posted an answer for this Samsung HL-S5087W DLP TV:
"Check your audio setting and make sure the internal/external speaker settings are correct"
Anthony Moore posted an answer for this Samsung HL-S5087W DLP TV:
"Check your Audio settings to make sure your internal/external speaker settings are correct"
Anthony Moore posted an answer for this Radio Shack Radio Communications:
"try WWW.RadioReference.com"
Anthony Moore posted an answer for this Uniden BC92XLT Handheld Scanner:
"Yes....non-digital frequencies. Depending on what youre trying to listen to and what they..."
Anthony Moore posted an answer for this Uniden BC340CRS Base Scanner:
"Sounds like its not getting enough power. Are you sure you're using the right power supply..."
Anthony Moore posted an answer for this Uniden BC92XLT Handheld Scanner:
"batteries or power supply or both ?"
Anthony Moore posted an answer for this Radio Communications:
"never heard of it ...sounds like a nice pistol and a cool car I used to own when I was..."
Anthony Moore posted an answer for this Yamaha Audio Players & Recorders:
"need to know if it comes back on when you turn it on again, even for a few seconds ?"
Anthony Moore posted an answer for this Uniden BC60XLT-1 Handheld Scanner:
"Hit Manual first, then type in Frequency, then press Enter"
Anthony Moore posted an answer for this Yamaha RX-V663 Receiver:
"Ironic that this popped up today. I just worked on my dads Yamaha RX-V663 today. Have you..."
Anthony Moore posted an answer for this TYT Electronics TYT TH-9000 VHF Transceiver:
"Might want to post what kind of radio you are having problem with for better answer...."
Anthony Moore posted an answer for this Radio Shack Pro-97 Handheld Scanner:
"I had the same problem and when this happens I just press and hold the scan button until..."
Anthony Moore posted a question about Radio Shack Pro-97 Handheld Scanner:
"trying to make my own cord out of USB cord and Headphone jack, not sure if I can figure..."