Yamaha RS Viking Professional - Recent Questions, Troubleshooting & Support - Page 5
Replace rotors and brake pads
There is a lot of videos on line to replace rotors and brake pads. If you have never did it before. Please leave it to the experts.
With this said, replacing the rotor and brake pads in todays cars are more easier.
1) get the right rotors and pads for your car.
2) Jack up one wheel at a time. Never work while the car is on a jack. Always use a jack stand to put the car on. Ie lower your car onto a jack stand to be safe. Put some plywood under the jack stand to prevent making holes in your driveway.
3) at this point - I will refer you to watch some videos with Chris Fix on how to replace the rotors and pads.
Road angel won't charge / turn on?
Take memory card out, hold the power button for 15 sec to put it on, now do the same putting it off. Put back memory card and turn it on, it should work now. Johan. South Africa
MTR in standby in radar display Jam2300
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I also had an issue with the file so the girl replaced it in 30 mins
there is one more but i don't remember its name it was 2 years back bitman something link this
Try it out brother
2010 honda crv how to turn oi life light off
- Turn the ignition switch to the ON (II) position.
- Push the Select/Reset knob repeatedly until the engine oil life is displayed.
- Press the Select/Reset knob for about 10 seconds. The information display shows the reset mode initial display as shown.
- select the "OIL LIFE" indicator by turning the select/reset knob. The display begins to blink. Push the same knob to enter the setting.
- The engine oil life and the maintenance item code(s) will begin to blink. Press the Select/Reset knob for another 5 seconds.
- The maintenance item code(s) will disappear, and the engine oil life will reset to "100."
1992 buick roadmaster
Check for the fuse box location using the owners manual which should be located in the glove box of the 1992 Buick Roadmaster.
NEED TO PROGRAM AUTOPAGE XT33 REMOTE
When I hold the valet switch like am ask the led light lights up and stays on no chirping at all but if I hold the valet switch when the car is in the on position I get a chirp help someone please
Trying to find the radio code to a Hyundai getz
have just heard you only need the last four (4) numbers.
but you must add 1212 to the numbers, if your first number is 3 add 1 to make 4, if the second number is 6 add 2 to make 8, third number add 1 again and so on
Remote start will start car but car shuts off
IF YOU HEAR RAPID CLICKING...IT MIGHT BE A BATTERY OR ALTERNATOR PROBLEM.OTHERWISEIt might be a faulty starter.One of the symptoms of a bad starter is a single clicking noise when you turn the key or push the start button. ... Most likely, you'll need to get your starter repaired or replaced. If you can jumpstart your car, drive to your nearest repair shop to get the problem diagnosed.there are many other possibilities,if the above options are not helping:Click the link below:https://carrepairworld.blogspot.com/2021/06/why-car-wont-start-you-hear-clicking.htmlthis will help.Thanks.
Not finding what you are looking for?