X-10 Televison & Video - Recent Questions, Troubleshooting & Support

just move the mouse over the picture in the corner and hold down left mouse button and drag the corner inwards and picture will resize.

X-10 X10... | Answered on Sep 04, 2017

I've dropped a lot of phones and other devices in water! No feeling quite like it :(
Maybe people will advice against this, but I take the hose to my vacuum and (with the batter out) vacuum every inch of my devices. Another tip that has worked is to put the device into ziploc bag of white rice for a day or so. It'll absorb any water that is still locked inside.
Hope it works for you!

X-10 X10... | Answered on Jul 05, 2012

go to www.fitness.manualsonline.com or www.remotecodelist.com

and download the codes + instruction manuals.

God bless you

X-10 (2430)... | Answered on May 26, 2012

I am confused a bit here, so what is the end device you are trying to turn on with the powermid extender?

How is the powermid attached to the end device?

It sounds like the device itself may be having problems and not the original powermid X10 if you put a new one in it's place and it still doesn't function...

Thanks, let me know

X-10 PM5900... | Answered on Oct 28, 2010

I haven't found a complete manual as such, but you can download each section (then print from browser) from the radio shack web site. I have provided the link below:


X-10 X10 Smart... | Answered on Apr 19, 2010

the unit is probably transmitting but the receiver on the lights is not getting an acceptable signal.

try placing your controller on a line closer to your main electrical panel.

Unfortunately x-10 technology is very unreliable its convenient but its also a pain in the ****.

Do the basics make sure the controller is close to your panel, make sure its not plugged into the same circuit that your appliances, computer or electronics are plugged into as they generate RF interference.

Smarthome.com sells several X-10 boosters, if your home has a 2 phase power get one that plugs into a 220v outlet that will "bridge" THE TWO PHASES.

X-10 (MC460)... | Answered on Jan 08, 2010

Most likely the pool motor or other devices are making the powerline noisy. I suggest either getting an x 10 tester or unpluggin hosehold devices until you find teh source of the noise.

Stephen Lerouge
Home Automation Inc,
Southwest territory Manager

X-10 X10 Smart... | Answered on Mar 21, 2009

Contact RCA at the number listed on the user manual.

X-10 X10 Smart... | Answered on Mar 06, 2009

Not finding what you are looking for?
X-10 Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top X-10 Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Cindy Wells

Level 3 Expert

5867 Answers


Level 3 Expert

84625 Answers

Are you a X-10 Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides