X2 Computers & Internet - Recent Questions, Troubleshooting & Support
Forgotten my computer access code
If you are referring to the power up access code screen that comes up when you first turn on your computer, it can be erased by removing the disc type button battery located on your motherboard. Make sure computer is un pluged from the power source. Remove the button battery for 30 seconds. Re-install it and power the computer up. It will boot up normally. If you are referring to a lock out of your Operating System, you will need to purchase a password recovery / reset program and load it into your computer during start up using the boot drive options selections located in your start up / set up menus. Its usually called: Boot Options or Boot Drive Options
X2 Amd Athlon 64 Ql 60 Ql60 Amql60dam22gg 1.9g S1
The processor upgrades available to you depend on your particular system; in particular, the motherboard hardware and BIOS installed by your computer manufacturer. They do not depend on the processor you already have.
20.April.2014
Hp xw8400 drive door wont open after it reads a
Straighten a paper clip and push it inside the small hole just above the open/close button while you press the button. You'll need to apply some force.
This is usually caused when the gear inside the cd/dvd rom is not working properly or damaged.
Good luck.
Thanks for using FixYa.
Not finding what you are looking for?