World Marketing of America Heating & Cooling - Recent Questions, Troubleshooting & Support

Hold of on coil. Basics. Check the fuel pressure. I had this problem in a restore, turned out to be fuel sock in fuel tank or filter. Check for vac. leak. Soap water at intake manifold and throttle body, injectors. Then check plug wires at idle in the dark for minor crossover, Now you can ck coil but i bet it is ok. PS Check the linkage stops Hope this helps if so let me know Thanks Mike

home depot

batteries are used to light the wick

Dust has built up in the ODS pilot safety. Blow out the pilot or flush it with Rust Buster. Let it dry and retry.
How it works/What to clean HERE If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Those things are expensive and made quite well. Most problems occur when dudt gets in the pilot safety. I have photos and a video Here and Here.
Before I retired I sold em and they were pricey. A lot of folk wanted to return them. No refund on these dudes so cover yer bases before buying one.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi,

Please click on the below link to view the users manual for your model:

http://www.yourheater.com/DH-2304%28Eng%29.pdf

Thank you for using fixya.

The link below will take you to the manual for your heater.

http://www.yourheater.com/DH-2304(Eng).pdf

Frego split ac error code h3 what is problem

Model 2320cpb. E2 code

Blue star inverter Ac HP error shown on display

Why do you need to dismantle this? Some of these types of cooler do not have replaceable parts inside. They are usually classed as a "Throw away" machine. It is often easier and cheaper to replace it than repair it.

Azure 1.5 ton splits ac old model e2 error

Blocked jets clogged with dust or dirt, blocked injector need a clean / service

o reset your Homebasix Oscillating Parabolic Heater, follow these steps: Unplug the heater from the power source. Locate the Manual Reset Button on the heater. It's usually a small button or switch. Use a fireproof, non-conductive rod (such as a wooden stick or plastic tool) to press the Manual Reset Button. After resetting, plug the heater back in and check if it functions properly. Remember to ensure that there are no flammable objects within 3 feet of the heater and that it is placed on a stable surface.

Voltas arrear code 88