Whirlpool Dryers - Page 4 - Recent Questions, Troubleshooting & Support


Check heating element.

Whirlpool Dryers | Answered on Jan 08, 2019


Check these in this order. Proper voltage of 240v. Door switch. Thermal fuse. Start switch. Timer. Wiring. Motor.

Whirlpool Dryers | Answered on Jan 07, 2019


It’s a control board issue. Unplug for 15 minutes and see if it resets. If not, replace control board.

Whirlpool Dryers | Answered on Jan 01, 2019


Look for a blockage in the hose itself and where the dryer hose connects to the wall vent. That's where you'll find a large amount of lint causing your problem.

Whirlpool Dryers | Answered on Dec 29, 2018


Loose connection / splice typically causes wires to burn.

Whirlpool Dryers | Answered on Dec 19, 2018


The sound button is the button that you wish the sound to go on when the load is finished drying. Thanks for the advice, I was worried I just bought them and already broken.

Whirlpool... | Answered on Dec 18, 2018


Hi

Press and Hold the End of Cycle Signal Button for 15 seconds, this will unlock the control lock of your Whirlpool Duet. Hope this helps...please post back for further assistance.

Daniel

Whirlpool Duet... | Answered on Dec 01, 2018


Always give model #

Whirlpool Dryers | Answered on Dec 01, 2018


Did you press the start button

Whirlpool... | Answered on Dec 01, 2018


Depends on the model always give the model #

Whirlpool... | Answered on Dec 01, 2018

Not finding what you are looking for?
Whirlpool Logo

12,366 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Smitty

Level 1 Expert

240 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...