Transcend Electronics - Others - Recent Questions, Troubleshooting & Support


I had the same problem with Windows 10. Go to manufacture on your computer for SD card and reinstall the drivers..it should work fine..remember whenever dealing with Windows you may have to reinstall drivers...

Transcend... | Answered on Dec 16, 2017


hi there.
this is what i have just found on the internet it might help you out but not sure.
After plugging in the device. Go to device manager (In run type "devmgmt.msc") In Device manager go to "Universal serial bus controllers" It should list the storage devices that you have connected to your PC. Right click and then click "Uninstall. Remove the USB drive and restart your system.
Try connecting the device again, I think this should solve the problem.
for windows xp
first you need to go to Device Manager by double-clicking on the System icon in Control Panel, choosing the Hardware tab, and clicking Device Manager.
go to divice manager
usb hub controler it will be at last of the list then
right click on usb hub controler open it go to usb root hub right click & go to properties
then go to device and click ok
do it 4 to 5 time it will work 100%
i have tried it and it worked
Best of luck :)
hi do one thing go to my computer right device manager ther u to o universal serial bus right click on tht option go to update driver select yes this time only give automatic k . before doing this step plz insert mother board driver cd after tht u do all this procedure thn c ur pendriv vl be dedected k
if none of the above works try this link out.
Kingston DT 1000 pendrive was not detected in computer Google Search

Transcend... | Answered on Nov 20, 2017


Check here for possible solutions;
https://us.transcend-info.com/support/cate-3

Transcend... | Answered on Oct 08, 2017


Do not use any more and get some data recovery freeware.

Transcend... | Answered on Sep 14, 2017


have a 2gb transcend pen drive.till now it was working properly but now wen i try it says insert an drive into I.the light is glowing and it is getting detected.But i am not able to read the data.anyone can please help me.

Transcend... | Answered on Sep 12, 2017


Hi Aking,
let's start at the begining,
you'r usb stick has been infected and you formatted it.
Did it ever work with the player?
Assuming it had.
Often this sort of stuff happens when file format is incompatible with the device. New operating system of a PC used to reformat might cause it. If you could refer to the manual of the player and check which usb formats it supports then move the data off the usb stick and reformat it according to the specification,
you should be able to put the data back on and it should work.
If above didn't help time to blame either of the pieces of hardware: usb stick or usb port on the player.
capture-3bzj335i3sdxgllsrtr5gtwe-5-0.jpg

Transcend 4GB... | Answered on Sep 07, 2017


this issue generally comes with unrecognisable partition types in linux

Transcend 4GB... | Answered on Dec 13, 2016


Put it also in another computer system to check it it is working.
If the memory size is 64GB, you might need ex-fat formatting.
This filesystem option must be available on your system's OS.

Transcend... | Answered on Nov 27, 2016


Don't be panic. you can try some data recovery software. You can see
http://www.asoftech.com/adr/index.html
It tells the steps how to perform data recovery.

If above does not work, you may have to format the pen drive (use quick format), and then use above mentioned software to scan again the pen drive and recover your files.

Transcend 4GB... | Answered on Aug 24, 2016


Write Protection on any portable USB Device can be applied by the physical lock provided on the card adjuster or some times provided on the pen drives, so make sure to make your drive not write protected by moving the lock in right direction.

But even after moving the physical lock for write protection the problem can happen due to some virus action. This happens when some virus or script which applies the registry hack to make any drive write protect when connected to the computer, In that case follow the procedure below to remove write protection from your pen drive.

1. Open Start Menu >> Run, type regedit and press Enter, this will open the registry editor.

2. Navigate to the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies


Note: If the registry key StorageDevicePolicies key does not exist, you will need to create it

Download this batch file called add.bat from here, and double click after download the key will be automatically added to registry.

3. Double click the key WriteProtect in the right pane and set the value to 0 in the Value Data Box and press OK button



4. Exit Registry, restart your computer and then again re-connect your USB pen drive on your computer. That is it, done.

Transcend 4GB... | Answered on Aug 10, 2016


No solution, it is damaged now due to high voltage current which it could not handle. Flash drives are easily damaged by such problems. All data gone, bye bye.

Transcend 4GB... | Answered on Aug 10, 2016


Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you may need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive this program may help: -
Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm

Transcend 4GB... | Answered on Nov 12, 2015


All your data will be erased & used space of your pen drive will restore to 0 bytes.

Transcend... | Answered on Nov 09, 2015


Plug it into another usb socket and you should find it works, Sometimes usb sockets and drives can become corrup.. by right when you reboot you machine it will revert back to normal

Transcend 4GB... | Answered on Nov 06, 2015


Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm

www.CardRecovery.com

Transcend 4GB... | Answered on Nov 06, 2015

Not finding what you are looking for?
Transcend Logo

948 questions posted

Ask a Question

Usually answered in minutes!

Top Transcend Electronics - Others Experts

Alun Cox

Level 3 Expert

2668 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Transcend Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...