TP-LINK Computers & Internet - Recent Questions, Troubleshooting & Support
How to configure TP Link router connected to Thomson TWG850-4 ?
have you got two dhcp servers running ?
turn off dhcp server in wireless router
and use the one in the Thomson TWG850-4 Residential Voice Gateway.
make sure ip address in wireless router is different to the Thomson TWG850-4 Residential Voice Gateway. make it one higher on last digit of ip address
make sure dhcp does not lease out this ip address.
9/10/2021 10:58:38 AM •
TP-LINK...
•
Answered
on Sep 10, 2021
Error code: 4801
Error code: 4801 "System can't satisfy the requested min upstream rate. Please input again."
10/24/2019 12:56:49 AM •
TP-LINK...
•
Answered
on Oct 24, 2019
How can i set a new password intenda wireless router?
You will need an lan or wlan connection to your router, the service/ip address, 1st, open to your web browser, 2nd, type in your service/ ip address into the link, 3rd, login to your router's settings, and find the wireless setting. if you do not understand these steps, please consult you manual for "login to router" settings, or find the web site, and find user assistance.
How do I set up a TP-Link wi-fi extender?
Hello, indicate model of the TP-Link that you are commenting, in order to find the best possible solution
I wait your answer
Greetings Franco Dosil
Hola, indica modelo del TP-Link que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil
6/4/2019 12:55:55 AM •
TP-LINK...
•
Answered
on Jun 04, 2019
I try put in web
Open a web browser.
Type 192.168.1.1 in the address bar.
Username is admin
Password is admin
Unless you changed your password to the router, in which case you will have to do a hard reset on the router to get all the defaults back. This means, more than likely you will have to setup anything that you had configured on the router before the reset.
Not finding what you are looking for?