Toastmaster Irons - Recent Questions, Troubleshooting & Support

Strip it and inspect yo water bottle and try to close it or dont use the water you can pour the water on the cloth

Toastmaster... | Answered on Sep 14, 2014

The steam irons I have see have a separate button to allow water from the reservoir to enter the steam chamber. This button latches down for steam and you unlatch it for dry. Also, there is a temperature range on the temp dial for steam.

The reservoir must have water in it for the iron to make steam. If calcium from the water has built up on the reservoir valve, it may prevent the water from entering the steam chamber. Straight white vinegar instead of water may help.

Toastmaster 3302... | Answered on Sep 24, 2013

The water fills through the hole on the front of the unit! Use a measuring cup and pour it in the should have a clear guage on the handle to show the water level.

Toastmaster 3302... | Answered on May 07, 2011

You can try to remove the spray nozzle if it unscrews and soak it in vinegar or CLR (Calcium,Lime,Rust available at stores) solution. Yes or use vinegar water mix 1/4 c vinegar 2 c water, or again there are products that are made for iron cleanout but vinegar is the least chemical based and cheaper. Fill the sprayer with the solution, and the steamer also. Operate the iron on the highest steam setting and iron on a folded towel to clean it out. You may have to scrape out the scale build up from the sprayer if it wont clear with the solution.

Toastmaster... | Answered on Feb 21, 2010

Unless you have a 5 or 6 hundred dollar iron, there is an excellent rule of thumb when an iron quits working. Buy a new one. These days, irons can be purchased cheaply enough that it is WELL worth the money. Not just for the convenience, but for the safety issues. This is an appliance that could burn your house down even if it's in PROPER working order. Hope this helps!!


Toastmaster 3302... | Answered on Mar 28, 2009


Here is where you can download this manual:


Toastmaster 3302... | Answered on Sep 28, 2008

Usually start at the cord end to locate internal screws to get top off then down to the next layer

Toastmaster 3302... | Answered on Aug 02, 2007

Heating element may have failed

Irons | Answered 2 days ago

My rowenta iron keeps shutting down while I'm ironing. What ...
Question Product: Rowenta Effective DX1900 Iron with Auto Shut-off Question Details: My rowenta iron keeps shutting down while I'm ironing. What can I do.

Top 229 Complaints and Reviews about Rowenta Steam Irons > Shopping > Appliances
Rating: 1.6 - ‎36 votes From the first day, iron shuts itself off while ironing. ... The last 3 have either leaked everywhere or the cord where it joins the iron keeps switching the iron off. ..... from the stainless steal down the right side of the iron and was leaking water all ...

Irons | Answered on May 19, 2019

I just aquired the same iron-- do you have the manual? I was told there was a place to add water and am unable to figure that out.

Irons | Answered on May 04, 2019

Not finding what you are looking for?
Toastmaster Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Toastmaster Irons Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Brad Brown

Level 3 Expert

18060 Answers


Level 3 Expert

84625 Answers

Are you a Toastmaster Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides