SouthWing Radio Communications - Recent Questions, Troubleshooting & Support

Try this for a solution; http://www.southwing.com/att-sh440/secciones/support/faqs-sa505.aspx

Hello,
Unfortunately, stuffs like this don't have parts. All you need to do is to look for something that can fit into the missing part and glue it. You need to manipulate the part the fell of because it is not sold.
I hope this is clear.
Good luck.

pairing code you usually set one one device then on the other you can input 4 numbers like 0000 and then 0000 on the other sometimes its 1234 or 12345

The default pass codes for Bluetooth Headsets are 0000 or 1234. Have you tried them yet?

delete history of your pairing headset at your laptop or phone

1.: Power on your iPhone 3G (if you have not already done so)
2.: Slide to unlock your iPhone 3G (if you have not already done so)
3.: Tap "Settings"
4.: Tap "General"
5.: Tap "Bluetooth"
6.: Make sure Bluetooth is enabled, by setting the toggle to "ON"
7.: Make sure your headset is discoverable
8.: When it shows up on your iPhone, tap it
9.: If prompted for a passcode, enter "0000" (if the headset instructions list a different passcode, use it instead of "0000")

Your headset should now be paired.

Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:

1. Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
2. Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
3. Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
4. Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.

I recommend RadioReference.com, they have detailed lists from all over the United States. In addition to frequency lists, they also include live audio, HAM radio lists, licensing information and a lot more.

I have the same problem. When o remove the interface the led is not flashing as per the instruction manual

http://www.manuals.group/results.php?search=TRONIC%20PLL%202023%20KURZ

Home - SONOFF OfficialSONOFF Official https://sonoff.tech Explore the innovative world of SONOFF, learn and chose about various smart home products, define your smart home,your smart choice!‎SONOFF Products · ‎Basicr2 · ‎ZigBee Bridge · ‎Home AUTOMATIONA Thorough Pairing Guide To SONOFF Smart Devices And ...SONOFF Official https://sonoff.tech > product-review > tutorial > how-to-p... How to quickly pair sonoff smart devices with ewelink app? This guide covers a complete and instuitive pairing instruction for all sonoff devices.Contact maker support. It is likely an issue with the new broadband router. The will know if there are compatibility issues..

All questions need FULL 'make model (what it is) first 3 words please. Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity. https://www.google.com/search?q=KPG-790 ..

There are some ideas here, but also make sure Squelch isn't all the way up, that you aren't on some type of mute and that the Volume isn't at Zero. https://www.google.com/search?q=two-way+radio+transmits+but+does+not+receive https://www.google.com/search?q=KEM+P29923 ..