Answered Questions & Solved Problems - Page 6

inside power distribution box under the hood!

Peugeot 206 Cars... | Answered 5 hours ago | 29 views

Sounds like an internal transmission problem- could be as simple as a shift solenoid but could be more, sorry but it's true :( Is there a check engine light on? Check it out with a good diagnostic scanner, one with transmission control module capability is ideal!

Dodge Stratus... | Answered 6 hours ago | 25 views

This is the best place for shredder spares

Paper Shredder Parts

We sell all sizes of paper shredder gears, switches, blades, etc. to facilitate your repair. We also have shredder replacement parts for crosscut paper shredders, ...

Royal Office... | Answered 6 hours ago | 17 views

Spray some starter fluid into the throttle body. If it starts, you have a fuel system problem. Check fuses and relays and the fuel pump. If it still will not start you will need a scanner to read codes and look at the sensor readings.

Mercedes-Benz... | Answered 6 hours ago | 24 views

Remove the belt, alternator, and the mounting bolts that thread into the engine block/head!

Hyundai Cars &... | Answered 6 hours ago | 32 views

I would first the fuel pressure. You may have a restricted filter or weak pump that is not supplying enough fuel to the injectors.

Nissan Cars &... | Answered 6 hours ago | 17 views

Have you tested the camshaft position sensor and crankshaft position sensor? The remote start could be a possibility and if it's simple to disable I'd try it but testvthe senors first with a volt meter capable of measuring ohms/resistance. If you haven't interfered with any wiring related to the remote start system it's doubtful to be at fault, take a look at it. Did you unhook the battery for a few minutes just to rule that out? Is it displaying any CEL/MIL or trouble codes?

Best of Luck My Friend, Have a Great Day! No worries, we know it's something simple and you'll get it!!!

Suzuki Cars &... | Answered 6 hours ago | 24 views

abs module. get a service manual

Hyundai Cars &... | Answered 6 hours ago | 19 views

Here is a post from previous questions about the flex plate torque.

2010 Ford Escape | Answered 6 hours ago | 16 views

you fix it by figuring out why it wont open

Jaguar Cars &... | Answered 6 hours ago | 17 views

hire professionals before you electrocute yourself

Solar Pool & Spa | Answered 6 hours ago | 13 views

no we are all poor here

Fast Computers &... | Answered 6 hours ago | 13 views

This will sound strange, but worked for me. Unplug your machine for 10 seconds, then plug back in and rapidly open and close the lid 7 times. This will reset your machine.

Washing Machines | Answered 6 hours ago | 18 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides