Answered Questions & Solved Problems - Page 4

Hello George, :
We do not know what you are attempting with what.
Is this a computer of some kind, what is the makers name and model. (and no posted screen errors) photos in the below link.
I guess the unknown PC you are attempting to install software
to what OS (operating system on PC)?
2d analysis, (this means nothing, lacking true name)

Did you buy this 2d software, and lost the license is that it?

The Computers &... | Answered 3 hours ago | 16 views

Hi, Angel and the usual suspects are:
1. Severely discharged or a damaged battery must have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Faulty alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system relay or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Fuel tank empty
11. Fuel tank contaminated with ethanol sludge.
12. Water or dirt in the fuel system, or clogged filter.
13. Quick disconnect check ball stuck.
14. Restricted, blocked or kinked fuel line.
15. Faulty fuel pump.
16. Faulty pressure regulator.
17. Faulty or clogged fuel injectors.
18. Lean angle switch is faulty or needs adjustment.
19. Catastrophic engine failure, perform a compression test.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
bike shuts off while riding please help Suzuki GSX Motorcycle Forums...
Suzuki Boulevard M109R 2006 2010 Repair Service Manual PDF Download... $15

2009 Suzuki... | Answered 3 hours ago | 75 views

nobody on earth uses XP the virus magnet
why are you , ? time to upgrade, if wise.

honestech tvr 2.5 this is software video editors
what does that have to do with XP?
the product number of what (add noun here)
tell more get more tell all that is in front of you, A PC?
what PC, what OS (XP, what are you attempting to do?
Install Honestech from scratch that it?

The Computers &... | Answered 3 hours ago | 15 views

Have you changed your fuel filter? Might have your exhaust flow tested.

Dodge Caravan... | Answered 3 hours ago | 15 views

Either get a hold of the manufacturer for a replacement or find one that has the same dimensions and pull rate to replace it.

Heavy Machinery | Answered 2 hours ago | 18 views

If you go to they have a built in Hollander interchange. Just punch in what you are needing and they will tell you what is available that fits. If you just keep track of what the engines are out of, you can figure out what interchanges.

Chevrolet... | Answered 3 hours ago | 11 views

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.!topic/

1977 Suzuki GS... | Answered 3 hours ago | 32 views

FIXYA is free, but 6YA charges for using it.

Because it is free, many questions are never answered.

The more information provided in a question, for example, manufacturer and model of product, or steps taken that result in the problem, the more likely to receive a suggested "FIX".

Also many irrelevant questions and advertising gets posted. This is focused on fixing, and not simply questions asked that someone thinks about, or news items.

You need to be careful in trusting answers that only suggest going to buy a manual that doesn't relate to your question.

Read the links below for more information.

Computers &... | Answered 3 hours ago | 18 views

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki Burgman UH125 Service Manual

2009 Suzuki... | Answered 3 hours ago | 120 views

depending if he has any other ailments that cannot take certain things like is he diabetic? so sugar, natural sugar. but anything spicy. anything that makes your face feel hot then is raising your pressure. exercise. you don't want to raise it too quickly.either. warm or hot ( not scalding water) shower or bath. hot coffee. is it a reaction to something. like a bee sting? so when someone that is allergic gets stung ( like me) my blood pressure drops. so I can take an adrenaline shot ( epi-pen), but I take Benadryl.

Health & Beauty | Answered 3 hours ago | 39 views


There are many different places you could get your car serviced, such as:
  • Local garages
Lots of small local garages offer servicing at affordable prices. Depending on which car you have and when you bought it, this could be the most affordable option for you.

  • Dealerships
If you want your car to be serviced by someone who is an expert in your particular make of car, then it might be a good idea to have your car serviced at a dealership. For example, I own a Skoda, so I take my car to a dealership that sells and services Skoda cars in North London.

  • Where you bought the car
If you bought your car from an official dealership, you may need to have your car serviced by them. This is sometimes the case, depending on what car you have and if you bought the car on finance or if it's covered by warranty.

Cars & Trucks | Answered 3 hours ago | 16 views

Side effects are:
3-Trouble breathing

The Health &... | Answered 3 hours ago | 23 views

you have to call showmax

Televison &... | Answered 3 hours ago | 18 views

Ramadan is one of the pillar of islam from 5 others. On this date, Muslims celebrate this event and show patinece and scrifice for their self. On this date We as muslim share Ramadan quotes, wishes and greetings with each other and learn Ramadan Duas to open fast.
3-mlav0bihvaaxftyphgvhenj4-1-0.jpg | Answered 4 hours ago | 104 views

Never pound out anything on a motor especially when it's aluminum casting first make sure you have everything removed that would get in the way go to rockauto.Com and look up your car and pump there you will see pictures in multiple views of what all sides of the pump look like so you can get a full understanding of what's going on jack up the vehicle and remove the tire so you can get better axcess to the pump and see it better on the inside of the pump there is a rubber o ring gasket that is squeezed in to the engine front cover to seal the water pump from leaking and this is what is making it very difficult for you to get it out it also may have rtv sealer on it making it harder to slide out now as look at the pump and everything is removed that would stop it take liquid wrench or pb blaster or WD40 and spray it around the pump where it fits into the front engine cover this will aid you in pulling it out don't worry you can clean it up with brake parts cleaner or rubbing alcohol later just try to move the pump in a little to get the spray lube into the front cover and this should help you for total removal of the pump these front wheel drive engines are very hard to work on from overhead that's why jacking it up and working through the wheel well will be much easier if you still can't get it out and all is disconnected attach a slide hammer to the front pump impeller on a corner at at time and pull it out and keep going around the triangle to it comes out good luck I'm sorry if this comes late to you I'm a taxi mechanic in nyc.with 50 years experience and I was rebuilding a motor last night that was giving me problems and I usually do fixya answers around 3a.m. but couldn't so I am going home now and I saw your post and I picked it up right away to answer before I left work so just be patient with it and you will succeed in getting it out stephen

Ford Cars &... | Answered 4 hours ago | 27 views

Instead of asking for the recommendation, you can analyze some fact and select a gaming site on the basis of your expectations. In my opinion, look for a site that offers welcome bonuses but checks them carefully, as they can be quite generous than they actually are. You can get this benefit at games such as Domino qiu qiu that helps a person placing better wagers and earning more points, thereto.

Computers &... | Answered 4 hours ago | 143 views

Nowadays problem of cellulite is increasing day by day.There is around 90 percent (approx) of women are suffering from cellulite and nobody feel good with this problem. So there is some Tratamientos Celulitis to get rid out from this by maintaining proper diet and exercise.
To reduce cellulite on your legs and buttocks you can do exercise on the daily basis, you should do exercise for at least 35 minutes in a day.


Health & Beauty | Answered 4 hours ago | 358 views

yes it is normal i have one and it has been doing that sine i brought it i took it a part and there is nout wrong with it so yer its fine

DeLonghi DEBIG24... | Answered 4 hours ago | 247 views

208volts is not a recognized voltage. We have 230v EU. 110v USA. 100v Japan. 415v from three phase and many more but only those values. If your mains supply is 230v then a 240v element is fine.

Miscellaneous | Answered 4 hours ago | 15 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides