SmartDisk Televison & Video - Recent Questions, Troubleshooting & Support
Receiver
Hi
If you're pretty handy doing things you can try these.
1) Using a small pair of needle nose pliers, gently squeeze the USB plug back into the right fit for the port. If this doesn't work, try 2).
2) Remove the cover from the remote by either unscrewing it gently prying open the seam along the side. You may brake a little of the case along the seam, but that is replied again after repair. Once you have the case open, look at how the cable is attached to the circuit board. Before removing the cable from the board, purchase a new data cable from an electronic store, or even cheap 2nd shop, etc. You will have to purchase a DATA cable not a charging cable! They're wired differently.
Once you have the cable, cut the opposite end that you need off and either solder on to circuit board or if a connector is used cut the wires close to the connector so you can solder the wires. (should be colour coded).
NOTE: If you need to solder the wires together purchase small diameter heat shrink tubing for electrical insulation from electronics store. If you can't get it, then use 2 strips of electrical tape with the wires separated in between & press the stops together using the tape adhesive to separate the wires from each other.
If you don't know which colour goes where, look on internet for USB plug wiring diagram.
Once finished reglue the case back together with a suitable plastic adhesive.
Hope this helps. Regards Bob From The Land Down Under, OZ.
7/8/2017 12:32:27 PM •
SmartDisk...
•
Answered
on Jul 08, 2017
Hi, I get to the
Hi,
Please format the hard-drive.
There may be some bug in the file that you are transferring. So get the file scanned by an anti-virus.
Good luck and have a nice day.
8/10/2010 7:41:33 PM •
SmartDisk...
•
Answered
on Aug 10, 2010
Virus
don't worry it only delete the virus not your data
1/3/2010 9:20:07 AM •
SmartDisk...
•
Answered
on Jan 03, 2010
I Have Lost My Remote To My Studio Standard RS-912
If you have switched off it by using power button to its remote control, you must have its remote control to switch it back on. Anyway, try pressing the Ch up or Vol up buttons once. In rare cases, this might make it switch back on.
I need a replacement remote control for JVC NX-BD3 network media system
If you wish to get setup codes, three
digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to
some popular model remote controls are given. Select the 'Timeslide'
option from the drop-down list by the 'Sidebar' at the display
window. It will make search easy.
What is the universal remote
To setup so a firestick could control my Mastertech tv when I tried element from the brands to choose from it worked like a charm for on/off control, volume and mute controls from the firestick. So you might try using Element as a brand or the codes for Element tv's. BTW, I went through several brands before I landed on Element which worked.
Program codes for symphonic dvd player
Hi David, indicate the brand and model of the team you are commenting on, in order to find the best possible solution
I wait your answer
Regards Franco Dosil
Hola David, indica marca y modelo del equipo que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil
Tcl power comes on but no picture or sound. Tv has backlight lights when powered on
Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem.
One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in.
As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!
Not finding what you are looking for?