Siemens Washing Machines - Popular Questions, Answers, Tips & Manuals

The E34 error code on your Siemens IQ800 washing machine indicates adoor locking problem. Let's troubleshoot this issue step by step:

1. Close the Door Properly:
   • Ensure that the door isfully closeduntil you hear aclick. Sometimes, anexcessive loadof laundry can prevent the door from closing correctly.
   • Check if there's any garment trapped between the door and the frame. Remove it if necessary.
2. Restart the Program:
   • After ensuring the door is properly closed,restart the washing machine program.
   • If the error persists, proceed to the next steps.
3. Check for Door Lock Issues:
   • Verify that thedoor lock mechanismis functioning correctly.
   • Inspect thedoor insurance wiringto ensure there are no loose connections.
   • Look for any blockage or issues with thetriac doorin the control module.

My first thought was that it was a problem with the drive belt or tensioner, but if it spins, that can't be the answer. That points to a main board or motor controller problem. In the first instance try a Power Reset. Disconnect the machine from mains power for a couple of hours, or preferably overnight. Press and hold the power button for 30 seconds and then plug it back in. If that doesn't fix it, you need a service call. It doesn't appear to be a known issue. https://www.google.com/search?q=Siemens+Siwamat+276+front+load+washing+machine+not+agitating ..

on the bottom right , open the round door, look on the right side of the opening, just to the left of the screw, there is a tab you can insert a flat head screwdriver in and pull down on the tab. it should move down about an inch or so, releasing the door lock.

1. Locate the tab on the softener compartment and lift it.
2. Pull out the dispenser drawer by gently pulling it towards you.
3. On the top of the dispenser drawer, you should see a locking mechanism. This mechanism is usually a small lever or button that you need to press in order to release the lock and allow the drawer to be removed.
4. If you can't find the lever or button, consult the user manual for your specific model of washing machine, which should have instructions on how to remove the dispenser drawer.
5. Once the dispenser drawer is removed, you can clean it and the interior of the machine.

Note: If you are unable to find the instructions in the user manual, you can also contact the manufacturer for assistance.

mens IQ700 Washing Machine Not Working. Tell me Answer My Siemens IQ700 washing machine does not work There could be many reasons why your Siemens IQ700 washing machine is not working. Some common issues include a lack of power, a malfunctioning door lock, or a faulty control module. Without more information about the specific problem, it is difficult to provide a definitive answer. I would recommend checking the user manual or contacting Siemens customer support for troubleshooting assistance.

ck out this........ https://www.how-to-repair.com/help/faqs/siemens-washer-wfxd8400uc-wont-spin/

In order to deactivate the Child lock press and hold the Drying Level button (till the`lock`symbol disappears from the display).

ck here... https://www.justanswer.com/uk-appliance/52akm-hi-i-siemens-siwamat-6102-washing-machine-when.html

The water pump for your dishwasher could be weak or should be replaced.Or it can be caused by debris or that has built up in the water circulation system.

This error can't be reset, it is a repair job. The code mostly means that the carbon brushes are end of life. You can replace them yourselves with new spare parts.Mar 22, 2018Please don't type all in capitals. It is hard to read and considered 'SHOUTING'.https://www.google.com/search?q=siemens+WM12S740EE%2F11+error+f43

Contact Siemens directly to request a manual.

Could be cycle timer or control board failure

Hold for 4 seconds. Make sure finger is not dry. https://www.youtube.com/watch?v=5o1qrTWIVec

Repair/replace the control panel.

A more practical approach would be to replace the defective level sensor so tub level would be correct.

1. Lets try to reset it and if it happens again you will need a technician or to call manufacturer due to motor error
2. Turn the dial to the off position, in some machines this is known as the rest position.
3. Then turn the dial to the half-way point, this would be the 6 o'clock position on a traditional clock face.
4. Then press and hold the spin button, while also moving the dial to the 7 o'clock position.
5. Continue to hold the spin button for at least five more seconds then move the dial back to the off/ reset position.
6. Finally turn the machine back on and the error code should be cleared.

Hello, may be possible. But only if you have blanking plates opposite sides for the hinges and latch. It should be easy to see. they are removable plates to cover the space for the hinge. Sorry to say ONLY if this is present can you flip the door. Good luck Hope this helps !