Sharp Retail Supplies - Page 5 - Recent Questions, Troubleshooting & Support

Replace the batteries

Press the CASH TEND button

Sharp XE-A102 full User and programming manual is here:http://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A102_operating_and_programming_manual.html

Hi,
Go to the link
http://www.manualnguide.com/shared/sharp-xe-a102-cash-register-operation-manual/35/

and download your manual.

unplug and wait 10 min re plug to reset google your make , model # manual press the helpful button and follow me on fixya

When entering the clerk passwords, they appear as asterisks **** on the tape sometimes, sometimes this code has to be entered before machine will function,security. check link, press the helpful button https://www.royalsupplies.com/cashreg/Instruction%20Manual%20A600-601%20ver8%20GOLD.pdf

Hi. Common problem. Sharp had a manufacturing defect in the drawer. The two white wires were not dressed behind the tray. The tray comes back and cuts through the wires over time. This causes the drawer drive circuit to short out. Sharp may still be covering this problem so check with a local dealer (The F means finalised or sale finished, so the drawer should open at that time). Great model but shame they got this wrong. Usually not too bad to fix but needs a tech.

Hi. It's an Epson type printer and the ink roller code number is IR91. You can still get them from many office supply companies, or on the net.

Press the clear (CL) button to clear the error. Type in your logon code (PIN number) and press the clerk (CLK) button. If you have forgotten your PIN number, you can program a new one. One of the users has a manual here: https://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A207W_XE-A207B_XE-A23S_Operation_Programming_manual.html

If the F is at the left then it just means finalised or sale finished. This means the sale was completed normally. The drawer is probably not opening because that model had a factory fault where the back of the tray cut through the drawer wiring. If you take the tray out and check the two white wires inside, you may find one of them has a small cut in it. If so, it usually blows the drawer circuit and it will need a technician to fix it. There was a recall on them for this problem so check with a dealer as they may still do it for free. Great machine but this factory fault was a pain.

Make sure the ink roller has not dried out and is inserted correctly. If it is ok, the printer is probably faulty. These tiny printers do not last more than a couple of years under normal use.