Sears Heavy Machinery - Recent Questions, Troubleshooting & Support


Best Manuals I suggest you to get one of these manual books that help you in the long run and make you self reliant. It's very helpful, trust me

Sears Heavy... | Answered on Nov 18, 2017


In my experience the only place to get parts for Sears equipment is Sears.

Sears Heavy... | Answered on Apr 22, 2016


In my experience Sears is the only place to get parts for Sears equipment.

Sears Vacuum... | Answered on Apr 22, 2016


I would first pull off the recoil assembly and clean out the assembly. There should be something in the recoil assembly that should pop out and engage the motor when pulled. Lube/flush that with some light spray lube.

Sears Vacuum... | Answered on Apr 22, 2016


Sears the place to go for the information you want. Last time I needed a manual there was a charge to get it.

Sears Heavy... | Answered on Apr 22, 2016


The first thing I would do is to spray the screws with a penetrating oil like PB Blaster. Let it set a while and try again.

Sears Heavy... | Answered on Mar 23, 2016


Remove the 5/16" allen cap screw on the end of the shaft. The knife assembly slides onto the crankshaft and is keyed with a woodruff key. Soak the shaft in pentrating oil overnight and try to slide it off or use more persuasive measures like tapping or a slide hammer. You'll see a big nut it's a LH thread so to remove it turn it CCW. The rest is straight forward. I can send you the owners manual if you provide an email address. It illustrates the process in detail. Ronald

Reply

Sears Heavy... | Answered on Mar 13, 2016


from a mower shop or hardware shop or service agent for the make of machine

Sears Heavy... | Answered on Sep 06, 2015


IS THIS GAS TANK MOUNTED ON THE SIDE OF THE MOTOR AND IF SO I MAY HAVE A GAS TANK FOR THIS UNIT

Sears Vacuum... | Answered on Mar 01, 2015


Sears has a great online site which you can get parts for almost any make and model equipment.

Here is the link

SearsPartsDirect.com

Sears Heavy... | Answered on Nov 24, 2014


Call Fred at 651-786-4277 I have used bags and some new bags. I also refurbish chipper vac bags

Sears Vacuum... | Answered on Nov 24, 2014


The carbon may be coming from the operation with the choke on. However, you may want to check the flywheel key just to make sure the timing is not off with a partially sheared key.

Fuel Starvation - Float Bowl Carburetor
1) remove air filter assembly
*be cautious of tearing the mounting gasket. If it does tear, you HAVE to replace it. It is part of the priming system
2) remove the float bowl fastener. This is the main jet
3) carefully remove the float bowl, the rubber o-ring/gasket will not be able to be used if it is removed, you WILL have to replace it
4) using a spray 'carb cleaner'
spray up thru the center of the carburetor
spray and clean the main jet with cleaner and 'tag' wire
(tag wire is very thin, and can be used to clean the hole in the center of the main jet)
5) clean any debris from inside the bowl or carb body
6) re-install bowl and center bolt, air filter assembly

*if you need gaskets, your local lawn & garden dealer can supply. The kit is cheaper than individual gaskets, and all the parts needed to finish the above repair are in the kit.

I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae

Sears Heavy... | Answered on Nov 06, 2014


Go to this site and input your model number and they should have it.
http://www.searspartsdirect.com/partsdirect/index.action
Once the parts page comes up, you will see a tab for the owners manual.

Sears Vacuum... | Answered on Sep 06, 2014


Please go to Lawnbagz.com
they have reproduction bags that are better than the original
they have elbows & deflectors too.
Good luck !!!
806008 - bag
804551 - deflector
804550 - elbow

Sears Vacuum... | Answered on Sep 06, 2014


Go To Lawnbagz.com
they have Replacement bags for a
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
They also have Elbows and deflectors !!
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
Good Luck

Sears Vacuum... | Answered on Sep 06, 2014


Go To Lawnbagz.com
they have Replacement bags for a
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
They also have Elbows and deflectors !!
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
Good Luck

Sears Vacuum... | Answered on Sep 03, 2014


Go To Lawnbagz.com
they have Replacement bags for a
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
They also have Elbows 804550 and deflectors !!
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
Good Luck

Sears Vacuum... | Answered on Sep 03, 2014


Go To Lawnbagz.com
they have Replacement bags for a
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
They also have Elbows and deflectors !!
Replacement Bag.806008 for Craftsman Vacuum-Shredder-Bagger.
Good Luck

Sears Vacuum... | Answered on Sep 03, 2014

Not finding what you are looking for?
Sears Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Top Sears Heavy Machinery Experts

Marvin
Marvin

Level 3 Expert

83514 Answers

lnbn1975

Level 2 Expert

204 Answers

dennys23601

Level 2 Expert

80 Answers

Are you a Sears Heavy Machinery Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...