Sanyo Logo

Sanyo Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 2K Products
  • 80K Answers
  • 2M Views

I had to call Sanyo on this same problem, and I just wanted to help you out on this. When you turn on the the TV and it asks for home or store, chose home then do the channel scan. After the channel scan completes, switch to your tv source, hdmi1, then turn off the tv and back on and it should just go straight back to hdmi1. Let me Know if this works!

Sanyo 42 in.... | Answered on Feb 16, 2019


why did you put a lock on it . and remotes do not have legs to get up and hide from us .universal replacements can be purchased every day of the week for under 20.00

Sanyo Televison... | Answered on Feb 14, 2019


Hi the easiest way to confirm fault is try a different scart lead preferably fully wired 21 pin if it does not work then player is at fault which would be expensive . PBK

Sanyo Televison... | Answered on Feb 14, 2019


What you have is most likely a failed main board. These sets are known for this problem. There are several different variations of the main boards. Make sure you order one that matches yours. The main board part # will start with J4@#. The main board part # should be on a sticker either on the main board itself or on the coax input terminal casing. I hope you got the TV for a good price !!!

Sanyo Televison... | Answered on Feb 12, 2019


You need the RF Adapter cables. I have seen items like that at thrift stores. The camera has that barrel connector
with 6? pins to connect it to the converter box that output to Channel 3-4. Keep checking ebay or craigslist.

https://www.manualslib.com/manual/894346/Sanyo-Vm-D66p.html?page=2#manual

https://www.ebay.com/itm/Sanyo-VM-D6P-8mm-Video-Camera-Bundle/163512488835?hash=item26121a9383:g:pLYAAOSwUMBb8MfJ:rk:1:pf:0

Sanyo Video... | Answered on Feb 06, 2019


press the helpful button,
the amber light may be for stand by or sleep mode, go into your tv setup and check that these are turned off

Sanyo Televison... | Answered on Feb 05, 2019


Press the cc button on the remote repeatedly until it cuts off. there is more than 1 cc mode. Unplugging it should not help but it might and lastly list your model number and stuff here so I know what you have ad what to help you with, pictures anything helps. Make model..... good luck

https://www.6ya.com/mr.mike

Sanyo Televison... | Answered on Feb 02, 2019


your icon is bad or your convergence chip, depends on the set you have- You could also have a power circuit board problem but its doubtful. if you tap or cause small vibrations to the set does the lines move or improve? If adjusting it does not get the lines to respond in any way or changing the channels or input does not change the orientation size and general appearance of the lines then more than likely its your icon board. Allow the set to cool down turn it on and test it. If it works you most likely have 1 or more bad captors. good luck
https://www.6ya.com/mr.mike

Sanyo Televison... | Answered on Feb 02, 2019


For some reason this happens to my sons playstation pro, turn both devices off and the turn the play station on and then the tv, leave it on the hdmi input- I've noticed that it also helps if you unplug the ddmi cable while both device are powered on and plug it back in- it must be a playstation issue because my son uses nec commercial sing monitors to play. Rest assured what your going thru is somewhat normal- and try switching hdmi cables some devices are picky and the ps is one of them. id start with shaping cables good luck
https://www.6ya.com/mr.mike

Sanyo Televison... | Answered on Feb 02, 2019


an antenna has coaxial connection to go to your tv from the antenna... it looks like a barrel. If it is a powered antenna it will also have a cord to be connected to power in some way (usb, ac wall plug etc) that needs to be plugged in often as most those antennas do not pick up anything until you plug them in but that depends on location and a bunch of other stuff. good luck
https://www.6ya.com/mr.mike

Sanyo Televison... | Answered on Feb 02, 2019


What is a problems with my washing Machines? Suddenly on the screen board the word E2 appear and Washing Machines is stuck and can not be used

Sanyo SW-1150T... | Answered on Feb 01, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sanyo Experts

Marvin
Marvin

Level 3 Expert

84540 Answers

Tom Chichester

Level 3 Expert

51334 Answers

ray gallant
ray gallant

Level 3 Expert

61847 Answers

Are you a Sanyo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...