Roper Washing Machines - Recent Questions, Troubleshooting & Support


Hi! If you need a manual/user guide to your Roger washer, I'm adding a link to a list of manuals to various Roger washers. Hope you'll find there the one you need and fix the trouble. https://manualsbrain.com/en/brands/roper/washers

Roper Washing... | Answered on Apr 05, 2019


To those who are posting that your washer is filling but not agitating or spinning, check the lid switch. Often times the bar that engages the lid switch gets bent or some play in it and will not fully engage the switch. You can check the switch by feeling for the switch (usually on the left side near the back - under the top) and engaging it with a screwdriver. I was able to get mine working by pounding it with my fist above the switch, with the door closed (Fonzi style :) I then bent the metal bar by holding it with pliers, and with the door halfway open, I pryed the door up while holding the bar tightly with the pliers.

Roper RAS8244KQ... | Answered on Mar 17, 2019


If you are referring to suspension rods or shock absorbers, just replace them.

Roper Washing... | Answered on Mar 05, 2019


MIGHT BE THE CONTROL BOARD . OR NOT PROPERLY PLUMBED IN

Roper Washing... | Answered on Feb 26, 2019


unplug machine

Roper Washing... | Answered on Feb 03, 2019


Could be a defective cycle timer

Roper Washing... | Answered on Dec 29, 2018


if you have the users manual try reading it to find a way to reset the system, if the problem still presist you can purchase a new one here>>www.discountbargainprices.com

Roper Washing... | Answered on Dec 26, 2018


Probably not. It should initially activate pump but pump should cut off when filling with water. Call factory service.

Roper Washing... | Answered on Sep 29, 2018


Few washing machines use a water pump driven by the main motor - most have a separate motor/pump assembly.

Clearly there is more wrong with your washer than is immediately obvious. Not sure what is meant by the motor "tries" to run - surely it either runs or it doesn't?

Perhaps you mean because the motor isn't running you can hear the buzzing noise some controllers produce?
I am guessing either the controller is faulty or the controller thinks the tub is empty because something has gone wrong with the water level switch and so refuses to switch on the pump..

Clearly somebody with suitable experience should take a look inside.

Roper Washing... | Answered on Jul 27, 2018


Many laundry machine hoses require a physical air gap, or air break, between end of hose & standpipe drain. This prevents both siphoning & sewer water backup entering washing machine... ( UPC ill. Manual for picture) ... Buzz*

Roper Washing... | Answered on Jun 24, 2018

Not finding what you are looking for?
Roper Logo

1,880 questions posted

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

Mike

Level 3 Expert

4357 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...