Rio Televison & Video - Recent Questions, Troubleshooting & Support

electronic shop, who sell electronic parts, have it! just bring to then the rubber belt. see to it that the rubber you're buying is a bit smaller (in diameter, about 2-3mm. smaller). goodluck.... check its thickness too.

That would be the timer record indicator. It has either a setting that has not completed (due to a transmission error) or you have set something by mistake to record something on a daily basis and is waiting to be shut down or have something to record on inserted. Clearing the record screen should clear this. If it doesn't then is a system fault. If this uses a tape, the mode switch will be faulty.

Hit the menu key and select the recording options. Select the option to view timer recordings and select each one to clear it. Follow the onscreen instructions or when on a recording hit the clear/delete button on the remote.

This might be something to do with any widescreen settings on either the VCR or TV.

First make certain that somebody (perhaps a child) hasn't been playing with the controls or altering the settings. If they are OK, something might have snapped inside. Video recorders generate a great deal of heat when running this can cause all sorts of faults.

They don't have a phone number since the company went bankrupt.

Only for sure way is to take the machine apart. This is not near as difficult as it seems. Benefit to this is you will find out what caused the jam.

Is this really worth a major repair?

Some problem with the mechanism---is problem (not clear) with DVD unit or VCR unit(indicated here its a combo).The VCR would be easier than the DVD with this issue.

Send an e-mail or phone the company and state that you have no instructions. I'm certain they will forward you some.

go online and type in your name brand and manuals and you should find your manual

from Cubao ride a jeep going to Quiapo then from Quiapo transfer to a jeep going to Taft avenue

Welcome to FixYa.

• From LRT Monumento, use the LRT to go to Gil Puyat Station (LRT).
• From LRT Gil Puyat Station, ride any jeep or BUS going to Caltex (Pasong Tamo).
• From Caltex, ride a jeep that says "Mantrade".
• Disembark at Walter-Mart Makati (Pasong Tamo).
• Eurotel is across Walter-Mart.
• Please Refer to the map below.

Thank you for using FixYa.

Jas247

Sir down load the manual here in this link. http://tv.manualsonline.com/manuals/mfg/govideo_1/doubledeck_vcr_ddv311.html Good day and best regards.